Topdog781's Likes Given

My sig pic I had 20x6x14 MT slicks on my se-r when I did the 13.5 @ 99mph.

IT WORKS! Put QG18 gears in your P11 TRANS! 56k take a nap.

There is no sidewall. If you want it to sit and look like a radial you'll need to up the pressure.

Also what size are you running? If your running a 22 or 23 on a 15 inch rim there isn't much side...

Here are some pics of my car. I can't find any pics of the 20's on this computer. I'll have to check my laptop later.

24x9x13
http://img.photobucket.com/albums/v291/AaroNX/MistyCasteel052.jpg

22...

Yeah, i had 22X8X15 m/t's and i lowered them to 10psi and had track officials trying to tell me they were too flat and to put air in them. They were not flat and they never had a problem. They we...

Is the car aligned properly? Mine felt weird until the alignment was done. Try and snap some pics.

There is no solid feel with full slicks....bouncy is more like it.
Just hang on the enjoy the ride down the track.
Test fitment only pic below btw...MT 15x8.5x24" slicks
http://i44.tinypic.com/1174...

Imma wrap it alright! Lol.

im going 12.5.1 on 88mm block with 150 or more direct port shot in the sometime future

The Sport Compact Car B13 SE-R resurfaces!

On a intake/stock cam engine maybe.

The ASP budget blew the SSAC out of the water on every high comp 2.0L tested in the north east, especially after 7000rpm.

9's will be doable N/A. We may touch 9's before you turbo guys do.:shocked:

SR23VE taking home trophy at Honda track event

JC custom 4-1 header

Feel free to play around with our gear calculator: MFactory® Competition Products - Performance Driveline Components :)

492whp@23psi

stock VE
Stock cams
Stock springs
Precision 1000cc
Walbro 255
eBay ram horn manifold
GT35R

Beat to hell daily.

only if you lack multi tasking.

Function*:*noun
Usage:*often attributive

the performance of*multipletasks at one time

new look

Old School right here!!

http://i41.photobucket.com/albums/e285/hialeahzbg/JDMSouthMeet036.jpg

I stillll want to see some damn vids of thiiss thing...

Re: Post your VE engine bays

Stock pressure should be 43.5psi. 58 psi is 4 bar, you should actually be running rich. At 4 bar, 270cc injectors will flow at 311cc. I would suggest buying a wideband A/F meter and see where you a...

This!! PLM Tri Y Big Tube Exhaust Header CRV Integra Civic SI DOHC B18C B16A B20B GSR | eBay
And this!! https://www.privatelabelmfg.com/product_p/h-ks-41mme.htm
The 2.4 has the reverse cone opene...

https://www.privatelabelmfg.com/v/vspfiles/photos/H-KS-41MME-2T.jpg
This is what the car has!!

New with a build/intro