All posts liked by Topdog781
Ok if your running a drag radial you would want them to be soft as they grip better. And softer tires wear faster. If your using a drag radial for its purpose the et street is the best. If you want...
Get a safc to fine tune your ecu or just sell it. JWT is notorious for being very conservative and pig rich.
Some guys down here in PR are getting really good numbers out of DEs.
10.1 DE, BC2 cams, tri-y header, intake and exhaust at the time of 180whp
Another one with similar setup but SSAC header i...
The life of an average Nissan Sentra/200sx/G20 owner:
98% of the time is spent on the forum buying parts or talking about fixing their car
1.5% spent staring at the broken car
0.5% spent fixing ...
Those of you worrying about your cars not running today realize you have about nine months to sort this shit out, right?
Ditch the Cometic gasket, ditch the arp main studs and head studs. Get GTIR main bolts from GregV, Get Mazworx headstuds, and either use an OEM VET gasket or get a better gasket such as Cosworth (o...
DIY Electronic Knock Stethoscope
I've used a water pressure gauge from home depot a while back. It worked great until the vibrations from the engine finally screwed up the needle after about 6 months, so I just bought a summit liq...
Don't want to splice your wiring? tap your RPM signal here
Well i'm in NC so its going to be a long weekend for me lol. I am very impressed with your numbers I would be very happy with those numbers what ecu are you using to tune? So basically you have a V...
Thanks for the nice comments,I have been working hard to get this NX ready for ATL. so that means alot to me.
I just gotta " like " every post! hahaha
I will add some vids I took eventually.
Big...
Shoot me a PM if you have any questions about the NismoTronic package, I would be glad to lend you a hand.
Also, it will work with your current setup and if you have a wideband in the car, which I...
I'd say a stock Acura Integra GS-R would lose to a NX2000 with the SR20VE swap because the VE has a lot more torque down low. Hell, a stock or lightly modded SR20DE will give a stock GS-R a good run.
They are not that quick. A stock SR20VE makes 187hp to the crank. You figure the car weighs 2500lbs without people in it. The gearbox is too long which makes it feel even slower. Some guys have man...
Basically yes. The secondary leads to a 2.5" outlet. The older versions have smaller primaries and a baby dick downpipe on them which could be restrictive.
Yeah you are right. A lot of guys are ...
cause its a ve with no tune and its basically stock they arent that fast haha
Dont forget the best mod. Walbro 255lph pump. Since 90% of the factory pumps fail prematurely cuasing down right dodgy performance.
I treied to get that other bung out...at the end by the flex...rounded out the bolt and just welded the bung an inch or to away from it.....make sure to keep it at the angle aem says in the lil boo...
mine held at 275whp when racing with 17psi, and 14psi for a long time. i have just llost the longest lasting trans ive had with boost ever. considering it drove across the USA 4 times and took me ...
http://www.sr20-forum.com/g-spec-performance/40053-xcessive-plenum-n1-intake-runners-4.html
http://www.sr20-forum.com/vvl/63471-pito-s-sr24ve.html
What it comes down to is the money. If you guys are expecting to make good power on simple setups, all motor VE is not the platform you want, plain and simple. We work hard for the bigger setups. I...