All posts made by JKTUNING that members have liked.
NismoTronic 3.9.007 Update: RealTime Updating and Monitor Window
NismoTronic 3.9.007 Update: RealTime Updating and Monitor Window
Just for future reference, the stock firmware (.bin) and NismoTronic (.tcd) have load scales (or as you call "TP") scales that are not always directly interchangeable.
The reason for this is bec...
You can wire the solenoids directly to the ECU, and you can select that output in the software.
We generally just wire both solenoids to the EGR output on the B13 ECU which is a GROUND.
Then ...
You can wire the solenoids directly to the ECU, and you can select that output in the software.
We generally just wire both solenoids to the EGR output on the B13 ECU which is a GROUND.
Then ...
SD Fuel Factor and the effect on fuel map resolution
I will try to work on a better explanation of the decel and accel tables in the help. The dTPS trim you see is the TOTAL accel fuel due to change in throttle.
You have a base table, and then "fa...
Kyle gomba (The Help files should update OK now, let me know if that fixes things for you).
Another update will be coming later today or tomorrow. This will address lynchfourtwenty 's issue with...
Kyle gomba (The Help files should update OK now, let me know if that fixes things for you).
Another update will be coming later today or tomorrow. This will address lynchfourtwenty 's issue with...
If you slip the RPM scale I bet it works .. :p
Damn inverted RPM scales are always giving me grief :)
NismoTronic 3.9.005 Update: Set Timing Window and Misc GUI improvements
NismoTronic 3.9.005 Update: Set Timing Window and Misc GUI improvements
NismoTronic 3.9.005 Update: Set Timing Window and Misc GUI improvements
NismoTronic 3.9.003 Update: IAT and Injector Latency Presets AND Logging Status
NismoTronic 3.9.003 Update: IAT and Injector Latency Presets AND Logging Status
NismoTronic 3.9.003 Update: IAT and Injector Latency Presets AND Logging Status
NismoTronic 3.9.003 Update: IAT and Injector Latency Presets AND Logging Status
I just still can't believe that after all those attempts that pointed you in the right direction that you still missed it .. even after a phone call :p
I will revise some of the help files to make...
I just still can't believe that after all those attempts that pointed you in the right direction that you still missed it .. even after a phone call :p
I will revise some of the help files to make...
Done. It will be in the next update .. just right click on the IAT table and you can use that as a pre-set if you would like.
I added this in today and actually went through and am going to be adding more logging statuses (Disconnected, Connected, Recording, Review, and Playback) will now be displayed to show the mode you...
I could do something like that .. how about turning the text from BLACK to RED, only when recording as well.
I am actually right in the middle of adding a drop down or right click option for the latency table which will allow you to select the injectors that you are using and it will "auto fill" the table...