JKTUNING's Likes Received

The 4.7k is close enough to 5k to use it.

It will slightly change the reading of the sensor, but not by much.

The IAT table really isn't as hard as you guys are making it seem. If you simply ...

Feel free to shoot me a PM or email with any questions you might have and I can gladly assist you in getting the car dialed in!

Unfortunately, you cannot use an ostrich emulator as it is a 28-pin emulator and the JWT chips are more like 32-34 pin chips.

If you need any other help with trying to get the car to run a bit b...

Literally everything updates with upload changes, including the general purpose parameters (RPM, TPS, ECT, etc). The update happens so quickly, that literally the update box is barely visible and a...

Literally everything updates with upload changes, including the general purpose parameters (RPM, TPS, ECT, etc). The update happens so quickly, that literally the update box is barely visible and a...

This isn't always the case, BUT on some vehicles you will need to remove the pins from the ECU connector at pin location 7, 14 and 15.

You can do this very easily by taking a very small screw dr...

It is all in what you are use to tuning .. Speed Density is a lot easier for most people to catch onto because your load values are real world values and are something that you can relate to.

No...

Download this.

[url]www.j-k-tuning.com/NT_DEMO/Startup%20Calibrations.zip[/url]

It has the new startup calibrations in it for the SR20VE.

Then simply change your MAF and hit upload and it ...

Download this.

[url]www.j-k-tuning.com/NT_DEMO/Startup%20Calibrations.zip[/url]

It has the new startup calibrations in it for the SR20VE.

Then simply change your MAF and hit upload and it ...

Download this.

[url]www.j-k-tuning.com/NT_DEMO/Startup%20Calibrations.zip[/url]

It has the new startup calibrations in it for the SR20VE.

Then simply change your MAF and hit upload and it ...

This is just about exactly what I was going to say.

You can definitely use the injector latency to help fine tune your idle fueling, especially if it fluctuates with electrical load.

I really need to know what you guys are doing to cause the program to crash, [color= COLOR=#FF0000][b][i][u]if it generates a runtime error .. send it to me!!!!![/u][/i][/b][/color]

I can tune a c...

What is odd is that it does not do this on every car and if it did we would have certainly looked into it. Not saying that there isn't the possibility of something that is triggering that code in t...

What is odd is that it does not do this on every car and if it did we would have certainly looked into it. Not saying that there isn't the possibility of something that is triggering that code in t...

So I am finally finding my way back to the forum after Saturday's event.

Thank you to everyone who came out to the shop, it was so very nice to meet all of you guys finally!

We will have to m...

So I am finally finding my way back to the forum after Saturday's event.

Thank you to everyone who came out to the shop, it was so very nice to meet all of you guys finally!

We will have to m...

So I am finally finding my way back to the forum after Saturday's event.

Thank you to everyone who came out to the shop, it was so very nice to meet all of you guys finally!

We will have to m...

So I am finally finding my way back to the forum after Saturday's event.

Thank you to everyone who came out to the shop, it was so very nice to meet all of you guys finally!

We will have to m...

So I am finally finding my way back to the forum after Saturday's event.

Thank you to everyone who came out to the shop, it was so very nice to meet all of you guys finally!

We will have to m...

We will have more than enough space for people to be inside, so don't worry about getting stuck in the rain.

We have two shops and a full show room that people will be able to view to some degree...

We will have more than enough space for people to be inside, so don't worry about getting stuck in the rain.

We have two shops and a full show room that people will be able to view to some degree...

We will have more than enough space for people to be inside, so don't worry about getting stuck in the rain.

We have two shops and a full show room that people will be able to view to some degree...

August 3rd: NismoTronic Dyno Day + Meet

NismoTronicSA Update: 3.4.3 (MIL Flashing Fixed)

NismoTronicSA Update: 3.4.3 (MIL Flashing Fixed)