lynchfourtwenty's Likes Given

Re: enlighten me on this oil drain conundrum

No you can't.

............................and we have LIFT OFF!!!!!!!!!!! Old MAF must have been done. Car started right up and idles/drives fine. now I have 4 N60 maf's. lol

Try holding your hand on the spring and spinning the wheel. If you feel the wheel spinning while your hand is on the spring the bearing is bad...

FYI: Nissan Datascan logs + Virtual Dyno = Fail

So looking over the base/start up tune I got from jktuning it is almost identical to the one I made. So I uploaded it and have the same issue still. Now this turns out to be a good thing because if...

**FIXED**

My friend who is an electrician and mechanic found the problem. There was a faulty plug on the wiring harness. It was melted or something, prob by previous owner and it doesn't reall...

Haha nice. I'd rock that shirt gotta be good for at least 50hp

Sent from my SM-N900V using Tapatalk

Ahhh, good point, I shall tomorrow. SE-L part out is taking up my garage space or I'd do it now.

BTW the cluch pedal feel is excellent as you guys said it would be with the FX500

Msd 96lbs $80 shipped.... I had them and a set of 72lbs just siting around.

Id1000s 380$ plus shipping

I'll get it sorted and then share so other ppl Have more options.

Tuning on E85 for max torque

LOL it will be that way when I do get that new motor set up lol... right now still stock bolts lol

You think we'd have this thread if it were that simple?

No, that doesn't work.

You have to machine two slots into the DE pulley to fit inside the oil pump gear (never seen this done). Or you ...

Yeah, you have said it a hundred times in your prior posts, you are spot on though. Oem harnesses are only good to get the damn thing running.

Clutchmasters FX500 install; UPDATE w/ videos on starting problem

I run the same clutch it does not chatter and the pedal effort is stock.

That is a thermocouple so will need an amplifier that converts the temperature to a 0-5V signal which can be connected to a NEMU ADC input.

Here are some examples:
Exhaust Gas Technologies Inc....

BUT if you keep the non-lsd axle bracket and non-lsd passenger side axle, you can just change the driver side axle ;) (easy way to save some money in a swap)...

Because if you do swap the pas...

This is really good info, and a really good test. I wish I'd thought of it.

This likely means your wideband wiring is fine, and the AFR change is true. As mentioned, could be injector battery vo...

I give you the option to go either full realtime mode .. which works without hitting any update buttons OR you can manually make the changes by hitting CTRL-U or Update Changes button.

The reaso...

For electronic boost controllers, I like them built into my ECU.

For manual boost controllers, I really like the ~$20 eBay units Vadim posted about: http://www.sr20-forum.com/turbo/35182-come-ge...

No sir .. RPM is only on the Y-axis but can be inverted to suite your style.

I kept it this way because that is how most "Honda" tuners are use to .. all of the OBD1 ROM editors are laid out wit...

Send it to john and just go with nismotronic $550.

Here's a link to the [url= URL=http://www.nismotronic.com/product_info.php?cPath=22&products_id=29]NismotronicSA Package[/url].

I wish I could weld my g/f's mouth shut