lynchfourtwenty's Likes Given

I use [url= URL=http://gspec.com/p-4866-nismo-thermostat-4-cyl-20-24.aspx]nismo t-stat[/url] in POS B14, get 34MPG with a shitty JWT ECU, (like a boss). "Opens at 62C(143.6F), Nissan OE thermostat ...

http://www.sr20-forum.com/electronics/70830-jb15-sr16ve-ecu-blue-plug-8500rpm-rev-limit.html

Nice and clean webstore, just ordered a NismoTronicSA package! :D Looking forward to tuning with it!

Oh, and I clicked like on fb! :)

sure isn't im an asshole every time I drive it lol

You need a bigger turbo so you won't hit boost @3-4k then you can tune it for n/a :P

N60 maf and nismotronic


Nismotronic ftmfw the SA Nemu is the best option for the price.

NismoTronic Store Update

Good catch on that .. that item was added when consult was still being used as a way of logging (before the NEMU was available).

The consult cable is no longer used with the SA package, since it...

Car is strapped on the dyno, gotta make the paper to pay the bills before we get to play with building these things... I have quite the amount of manifolds to build currently, so look out for VET a...

Look at the ec section of the FSM. The wiring diagram will answer your questions.

Ideally - Heat shields should be run on the 54C manifold, Turbo & J-Pipe.

By the sounds, you have your MAF setup and a blow-through. Ideally it should be setup as a draw through (Between the ai...

The leak sounds like the input shaft seal.

The noise is most likely one of the bearings - depending on when it is making the noise can identify which bearing is failing.

Ive caught condensation in my large catch-can from the VC's 5/8" line.
Probably only a couple ounces.


But as long as there is moisture in the air... if your oil gets exposed to it, it will absorb...

Thanks josh, yea I had to put up some pics for my dudes on here... showing my FWD dudes some love.

If the maf got wet it is most likely shot. If the car has been running and is warmed up there should be not moisture in the intake at all, condensation or not. Is it the moisture coolant or oil? Di...

I can hardly understand your posts

Yeah you did good service work on it. Thanks. Will ask you to do the same service if the new car works out.

I start Nismotronic each morning just for updates. w00t w00t! Congrats John and Dave. go, go, go! :racer:

NismoTronic 3.7.006 Update: OnBoard and Monitor Window Updates

Sorry lynch haven't got on. I plugged the holes and im using the de rods and pistons for time being. Ill keep your offer though! So who knows? Is the de oil pump spacer longer or shorter than the v...

Right on. Best to figure it out and get a plan together.

ve-t spun bearing

http://www.youtube.com/watch?v=zgcnMy8joy0

5000 for both cams. over 70% throttle and coolant temp above 158 deg

again nemu for the win!

Well I got it back! it seems they took it only for the audio and tools. unfortunately I lost about 1k in tools and 500-750 in audio but atleast I got it back...especially since me and my buddy have...