All posts liked by lynchfourtwenty
Use a lighter if necessary...
https://www.youtube.com/watch?v=-5M--0CSZ1I
Seeing all of these constant threads, how are they still in business? Don't get it. They must do a lot of local business in person or something.
The only JGY part I ever had was their clutch dis...
JGY is a terrible company. Fight tooth and nail.
ID ships in nicely foam padded box. I'll post up the packaging tonight if I can find it as I think I still have it.
JGY is full of shit. You may have received used injectors.
I bet Nissan will have some grease from AutoZone
Uh...it catches it. Hence the name 'oil catch can' as opposed to the 'stop losing oil can' :dunno:
;)
Don't worry I'll check it often
Not saying I didn't make a mistake, because it's always possible, but I was pretty thorough with my wiring. I took apart both VE and DE harnesses and made a hybrid harness following the pinout of t...
Finally got the time to DIY the blow-through. Feels good as OEM car :D
[url= URL=http://s567.photobucket.com/user/samuel_wong1982/media/1_zpsnxp1ktvo.jpg.html][img]http://i567.photobucket.com/al...
If you arced the battery terminals you need to inspect all of the fuses and fusible links for damage or partially blown/melting. Check all of them under hood and dash. Also recheck/retighten all...
Re-installing A/C in a B14 SE-R. Pics & a couple install notes/tips
"Panasonic BR2330A" style battery ordered from ebay (shipping from moates was 16x the price of the battery!!)
I will update this thread when I get it.
It all sounds like a bad idea. You need to leave the blow off installed. Just get a recirculate nipple fitting for your HKS and recirculate or switch over to blow through. You are blowing off mete...
If you are having an issue with stalling, why not just run draw-through and recirculate?
Sent from my SM-N900V using Tapatalk
Your friend did you a favor by showing the weaknesses of your car before anything more serious happened and you or others were harmed.
Class act of Todd as usual. At least you guys got it done ...
I'll add that it may be easier to get the rear trans mount bolted up first, then jack up the crossmember in the rear and get the rear crossmember bolts loosely threaded in, then line up the front m...
what looks like what happened is the bolt on the right worked itself all the way out, and the other bolt was left with all of the load being exerted on it. that coupled with these loose rubber bush...
SOOOO I have a curve ball to throw all of you! I was just under the car inspecting the mounts for a good 10 minutes. They all looked fine! I didn't see anything wrong with them so I started lookin...
I'm going under there in a little bit as soon as it warms up here. Supposed to be 70 today but its like 50 out now
I will take a lot of pics and post them here
Eh, they were kind of what I expected. I enlarged 6 holes in total with a 14mm drill. I had to cut and reweld one flange, and I think I know why.
http://i.imgur.com/I80HzsX.png
During product...
Final assembly.....
http://ost.ebeans.ch/albums/userpics/10005/normal_assembling_finished_head.jpg
The rocker shafts are set, both bolts torqued to 8.8N-m(78 "/#s)
All assembled, waiting...
I really think you had an intermittent short which is what was causing the old breaker to trip. Without that protection, you've got nothing to prevent the battery from dumping full power into a s...
Here's a breakdown of the #nissanfest 2016 Car Show award categories.
Best Nissan Skyline R31 to R34
Runner Up Nissan Skyline R31 to R34
Best Nissan GT-R
Best Nissan 2...
I'll try and post some pics of my car when I put it back together
Sent from my VIVO AIR using Tapatalk