All posts made by D-Unit121 that members have liked.
I ended up doing this. I ended up fitting the stock ww motor into a coolant tank that i mounted in the fender well.
I used 3 of these nozzles
http://www.dripirrigation.com/drip_irrigation_par...
The purple one of course
Re: Post Your B14 Pictures (Not So Silent)
How to install a bluetooth adapter on nemu v1
thats simple
change the plugs
check resistence on wires
visually inspect cap and rotor
you will be able to fix the problem from there.
thats simple
change the plugs
check resistence on wires
visually inspect cap and rotor
you will be able to fix the problem from there.
ah, i zoomed out of the page and now i see
guess the picture was formated for 1080p
I would run 2 relays in your system.
Use 1 relay for the oil and boost and anothe relay for the wideband.
try to give your wideband its own ground as well.
you can tap your cig lighter for sourc...
What Did You Do To Your B13 Today?
Car:1995 200sx SE-R
Suspension: D2 Coilovers
Wheels: 15x6 Rota Drift 2's
Brand: Yokohama
Model: S-Drive
Category: Ultra High Performance Summer
Size: 205/50/15
Weight: 22lbs
Use: spirite...
When using boost by gear the ECU will use a specific duty per gear.
A gear is determined by the VSS and RPM. Because there is no input of gearing, tire seize ect Nismotronic has a paramter ca...
When using boost by gear the ECU will use a specific duty per gear.
A gear is determined by the VSS and RPM. Because there is no input of gearing, tire seize ect Nismotronic has a paramter ca...
Dala is correct here. Nismotronic does not need to know your gate pressure. It does not need to know this to do what you want it to. Also it does not need to know manifold pressure and dosnt use...
Dala is correct here. Nismotronic does not need to know your gate pressure. It does not need to know this to do what you want it to. Also it does not need to know manifold pressure and dosnt use...
Dala is correct here. Nismotronic does not need to know your gate pressure. It does not need to know this to do what you want it to. Also it does not need to know manifold pressure and dosnt use...
I know this is not exactly what you want to hear but, If you end up needing to fuel up somewhere with bad fuel you can also retard the mechanical timing via the distributor for the time being or pu...
http://tapatalk.imageshack.com/v2/14/09/15/5322c0f605ef9d78b00f14449fab0839.jpg
Re: Post Your B14 Pictures (Not So Silent)
dont forget to bleed your coolant system after
didnt know this thread was about your K24 in your EG...Mr. S. Vang :rofl:
didnt know this thread was about your K24 in your EG...Mr. S. Vang :rofl:
would it be possible to have the CEL light up if knock is active?
It is probably the distributor cap seal.