se200's Likes Received

Ok. Example: mazworx motor mounts are 400$.... The rear mount from an auto p10 lines up with two of the bolt holes perfect you can drill a hole for the last bolt and for mount alignment, p10 auto m...

If you guys pull the heads get them decked or it will just do the same thing again over time. It's worth the 50-60$ machine work to know the head is true.

If you guys pull the heads get them decked or it will just do the same thing again over time. It's worth the 50-60$ machine work to know the head is true.

Ok. Example: mazworx motor mounts are 400$.... The rear mount from an auto p10 lines up with two of the bolt holes perfect you can drill a hole for the last bolt and for mount alignment, p10 auto m...

I have been working on this with him. its very odd. the car will idle great and respond well to changes. The o2 voltage for wideband and closed loop match and will stay in the mid 2.5ish area.........

I have been working on this with him. its very odd. the car will idle great and respond well to changes. The o2 voltage for wideband and closed loop match and will stay in the mid 2.5ish area.........

I have been working on this with him. its very odd. the car will idle great and respond well to changes. The o2 voltage for wideband and closed loop match and will stay in the mid 2.5ish area.........

The Nemu can do most of what's listed above. If you don't own a dedicated track car and want a great stand alone at a great price then nismotronic is in my opinion the best option. Aem has tons of ...

My b13 with Altima pedal looks like it came this way from the factory.

You made the right choice man, nismotronic is about 50 times simpler then MS and is a true plug and play. JK tuning has so many. Ase tunes that when you upgrade your parts you can just upload a new...

You made the right choice man, nismotronic is about 50 times simpler then MS and is a true plug and play. JK tuning has so many. Ase tunes that when you upgrade your parts you can just upload a new...

Yeah you need to provide more info on your setup.
Example: sr20ve with intake headers and Nemu - this can be dialed in with great results

Or

200sx se 1.6 ga16de with 230k miles running on 3 ...

I know you didn't list it as an option but nismotronic should be on your list. If cop ignition is a must you can use a rwd sr20det ecu converted to nismotronic and have four coil drivers for cop or...

I know you didn't list it as an option but nismotronic should be on your list. If cop ignition is a must you can use a rwd sr20det ecu converted to nismotronic and have four coil drivers for cop or...

I know you didn't list it as an option but nismotronic should be on your list. If cop ignition is a must you can use a rwd sr20det ecu converted to nismotronic and have four coil drivers for cop or...

^^^^^ Huh?

I have turboed over 20 fwd sr20 cars and all of them had TB coolant lines. On the bottom of the TB you should see coolant lines on both sides making a complete loop.

ouch dead cam... make sure you replace the rocker with the cam. good luck

You need an adjustable fuel pressure regulator and guage to see fuel pressure.

Well I went over the entire system and found no leaks. I took the boost controller apart and it's fine, but then I figured I'd see how well the sintered brass filter on the bleeder port flowed........

You need an adjustable fuel pressure regulator and guage to see fuel pressure.

the upper bolt hole needed to be enlarged. The two firewall bolts line right up. Very easy install.

What car are you driving?

I used a 94 Altima clutch pedal and cylinder with steal braided hydro clutch line. I'm running a 6spd so the rest is all swap parts. The Altima pedal and cyl bolted rig...

If you shave the head down and see any HP gains at all please let us know. The cost of doing this and the gains......if any...... are not worth your time or money. But feel free to give it a shot, ...

I have pics on here some place, but you have cut the lower center tray leaving it connected toward the front this way it covers the shifter cables. The other option is to trim the tray to fit upsid...

You need the intake manifold injectors fuel rail iac and lines from a USDM late 90s sr20de to make that motor work with your current wire harness. I have told this to everyone that buys that motor,...