SR16VE Pistons And SR16VE N1 Pistons
By my calculations
SR16VE pistons should make 13.5 to 1 compression in a 2L motor
SR16VE N1 pistons should make 13 to 1 compression in a 2L motor
So with a little work to these N1 pistons we should be able to get them down to a managable 12.5 to 1 compression.
Maybe a .5mm shave off the top and .5 mm deeper valve notches.
I guess we could run them the way they are and just add 2 gallon of c16 to 8 gallons of 93 octane and you end up with 97.6 octane perfect for 13 to 1 compression.
To get the gas to mix right put in the C16 first then use the presure from the pump to mix the gas as you put in the 8 gallons.
SR16VE pistons should make 13.5 to 1 compression in a 2L motor
SR16VE N1 pistons should make 13 to 1 compression in a 2L motor
So with a little work to these N1 pistons we should be able to get them down to a managable 12.5 to 1 compression.
Maybe a .5mm shave off the top and .5 mm deeper valve notches.
I guess we could run them the way they are and just add 2 gallon of c16 to 8 gallons of 93 octane and you end up with 97.6 octane perfect for 13 to 1 compression.
To get the gas to mix right put in the C16 first then use the presure from the pump to mix the gas as you put in the 8 gallons.