Originally Posted by
Cyrus We tried assigning ports every which way but apprently the right way. Is there special software that I have to use with this version of the rt? Tried just porting to conzult and the computer sees the ecu but conzukt says eccs error and I have similar problem with tunerpro rt... usb was plugged in fine and no water gets in where I keep the usb rolled up... bt the outside on the carpet and the bottom edge of the plastic from the dash. Doesnt seem like a good place to dischrge static either. But who knows.
Anyone got a stock ecu I can borrow to try some things out?
Not sure how computer savy you are, but plug the ecu in, go to device manager, find the adapters and they should show up udner ports as USB Serial port, it needs to be under com port #10 for both of them.
Try another laptop which never has had this ECU connected to. If it still doesn't work, make sure USB port is plugged into the chip.