Wiring AIT sensor to AEM EMS - Need help
Air Intake Temp. Sensor
There are 2 wires on a AIT sensor. Polarity does not matter. It requires AIT signal and sensor ground. Please follow the pin out below to wire in your AIT sensor. Remember to select the correct sensor in you AIT sensor wizard.
30-1600/1601/1602/1603
AIT signal - Pin 26
Sensor ground - Pin: 21 and 29 (tap to one of these)
There are 2 wires on a AIT sensor. Polarity does not matter. It requires AIT signal and sensor ground. Please follow the pin out below to wire in your AIT sensor. Remember to select the correct sensor in you AIT sensor wizard.
30-1600/1601/1602/1603
AIT signal - Pin 26
Sensor ground - Pin: 21 and 29 (tap to one of these)
So here is my issue. Pin 26 does not exist on the harness by the ecu. Its a hole where a wire would go. Where do I tap into now?