I was bored the other day...
... So I made a wacky shifter extension and a pool ball knob, with the knob it cost less than $10. I just bent some steel rod from Home Depot in a vise with a sledge hammer and welded a stack of nuts onto the rod. Then I just screwed the extension on and locked it in place with another nut (that part is under the boot.
I was out of black spray paint I put a sleeve of heat shrink wrap stuff over it for the time being.
It's awkwardly tall looking but the shifter is closer to the wheel so the idea is that time will be saved reaching for the shifter and then going back to the wheel.
Just thought I would share if anyone was thinking about this kind of thing. It was cheap and wasted a good 30 mins
I was out of black spray paint I put a sleeve of heat shrink wrap stuff over it for the time being.
It's awkwardly tall looking but the shifter is closer to the wheel so the idea is that time will be saved reaching for the shifter and then going back to the wheel.
Just thought I would share if anyone was thinking about this kind of thing. It was cheap and wasted a good 30 mins