Originally Posted by bre92ser
no it does not... look at the pictures earlier in this thread. the pad hangs off the edge of the rotor... so its going to rip pads apart with the edge of the rotor....up until the pads hit eachother, making your brakes useless. and i dont know about you guys, but im not about to start grinding on a brake pad to re-shape it. thats just retarded, not to mention that you would then still have 2 of the caliper pistons off-center from the rotor, adversly effecting heat transfer.
no it does not... look at the pictures earlier in this thread. the pad hangs off the edge of the rotor... so its going to rip pads apart with the edge of the rotor....up until the pads hit eachother, making your brakes useless. and i dont know about you guys, but im not about to start grinding on a brake pad to re-shape it. thats just retarded, not to mention that you would then still have 2 of the caliper pistons off-center from the rotor, adversly effecting heat transfer.
Dude, if I tell you that it does align its because the car in the very first post is mine, you wanna see pictures of my EBC pads after 5 months of street and track use?? One of the first things I checked was that the edge of the rotor matches with the edge of the pad, and that the pad covers the whole disc surface, this is not a guetto brake job, i would not joke arround with brake stuff while i drive a 300whp car on a race track.