Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Where do you guys get these?

+ Reply To Thread
Posts: 1-10 of 14
2008-10-29 01:43:58
#1
Where do you guys get these?
Where can i buy the plastic trims that go on the doors round the windows?...
This parts right here!...



Also i'd like to find these ones that go on the inside of the door....



THANX!
2008-10-29 01:47:29
#2
Try the dealer other than that good luck.
2008-10-29 03:23:34
#3
junkyard ,partout here,or dealer
2008-10-29 04:26:30
#4
Now... thats bad news
2008-10-29 11:18:20
#5
Isn't greg V able to get those?
2008-10-29 13:47:57
#6
GregV can get it yes. I am looking for the same thing as well. It is expenisve at the stealership. Junk yard you best bet
2008-10-29 14:44:16
#7
Yeah, GregV can get them. The piece in the 1st pic actually starts in the front window guide and ends in the rear window guide.

When you replace them, you will be able to easily roll your windows up and down once again.
2008-10-29 16:55:58
#8
Originally Posted by llaprad1
Yeah, GregV can get them. The piece in the 1st pic actually starts in the front window guide and ends in the rear window guide.

When you replace them, you will be able to easily roll your windows up and down once again.


if window operation is your goal i would remove the regulator and clean the crap out of it then use a high qulity brake grease or lithium grease the main cause of it sticking is because of the old super dirty greasy that is sludging it up.
2008-10-29 18:05:45
#9
Originally Posted by classicaddict
if window operation is your goal i would remove the regulator and clean the crap out of it then use a high qulity brake grease or lithium grease the main cause of it sticking is because of the old super dirty greasy that is sludging it up.


On a lot of these cars, the actual rubber that holds the glas in the sliders has split years ago and bunches up in the sliders with the glass.

I saw it happen on several B13s as early as 40k miles.

I removed my glass and found all the action to still be smooth as silk. YMMV.
2008-10-29 18:08:25
#10
Originally Posted by llaprad1
On a lot of these cars, the actual rubber that holds the glas in the sliders has split years ago and bunches up in the sliders with the glass.

I saw it happen on several B13s as early as 40k miles.

I removed my glass and found all the action to still be smooth as silk. YMMV.


This is whats wrong with my car also.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top