Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Mazworx SR Head Studs/ Main Studs

+ Reply To Thread
Posts: 1-10 of 18
2009-12-22 16:05:36
#1
Mazworx SR Head Studs/ Main Studs
INSTOCK NOW! READY TO SHIP! HEAD STUDS WILL NOT WORK WITH GTi-R Blocks!

To order, please visit our website links below:

Mazworx SR Head Stud Kit

Mazworx SR Main Stud Kit

We are proud to introduce our line of head studs and main studs for the SR. We have to come to realize that the engagement on the ARP off the shelf ones dont thread into the block completely and not bottoming out so it does not giving enough grab. So with these we developed will be the correct length and actually stronger and better material. We estimate an easy 600hp capability.Main differences between the current ARP head studs and main studs material to the material of our headstud kit.

ARP current head stud/main stud
8740 CHROME MOLY: Until the development of today’s modern alloys, chrome moly was popularly considered a high strength material. Now viewed as only moderate strength, 8740 chrome moly is seen as a good tough steel, with adequate fatigue properties for most racing applications, but only if the threads are rolled after heat-treatment, as is the standard ARP production practice. Typically, chrome moly is classified as a quench and temper steel, that can be heat-treated to deliver tensile strengths between 180,000 and 210,000 psi.

Mazworx Headstud/Main stud material

ARP2000®: An exclusive, hybrid-alloy developed to deliver superior strength and better fatigue properties. While 8740 and ARP2000 share similar characteristics – ARP2000 is capable of achieving clamp loads in the 215,000-220,000 psi range. ARP2000 is used widely in short track and drag racing as an up-grade from 8740 chrome moly in both steel and aluminum rods. Stress corrosion and hydrogen embrittlement are typically not a problem, providing care is taken during installation.

Made from ARP2000 material
12 point
220ksi tensile strength
Straight shank/bullet ends from complete bottom out
Comes with (10) studs, (10) washers, (10) nuts and instructions.

The main studs WILL CLEAR upper oil pan without machining! [/size]

Head stud comparison. Std ARP off-the shelf, Mazworx Head Studs, Mazworx 1/2"







Main Stud Comparison

ARP off the shelf, Mazworx Main



Last edited by mazworxsales on 2011-12-08 at 16-57-17.
2009-12-22 17:03:09
#2
NNIIOOCCEEEE definately going for these in the near future
2010-03-26 23:45:29
#3
why do you say with your main studs the upper oil pan will not have to be altered for clearence of the studs but ARP studs do, i personally have never seen, heard of, or had this issue. just wondering?
2010-03-27 03:19:36
#4
just orderd a set from them cant wait to get them in. thanks guys
2010-07-02 22:15:55
#5
Originally Posted by compleckz
why do you say with your main studs the upper oil pan will not have to be altered for clearence of the studs but ARP studs do, i personally have never seen, heard of, or had this issue. just wondering?


Yeah, i was wondering the same thing. Is the MAZ 11002 and the MAZ 11001 the same part? If not, what's the difference?
2010-07-05 23:05:21
#6
Are these american made or imports. Because fasteners is something that i would take a chance on. i know ARP is all american made product with high quality steel with lots of carbon in it which makes it tough as nails. I would love to be your next customer but i would need to know where they are made.
2010-07-05 23:13:44
#7
umm did you ever see there drag car....i dont think you need to wry you wont be making anywhere near what they make
2010-07-06 20:08:40
#8
Originally Posted by compleckz
why do you say with your main studs the upper oil pan will not have to be altered for clearence of the studs but ARP studs do, i personally have never seen, heard of, or had this issue. just wondering?


This is an issue with the RWD upper oil pans on the old std ARP studs.
2010-07-06 20:09:00
#9
Originally Posted by scottnotbombs
Yeah, i was wondering the same thing. Is the MAZ 11002 and the MAZ 11001 the same part? If not, what's the difference?



11001 is head studs
11002 is main studs
2010-07-06 20:09:18
#10
Originally Posted by redb13se-r
Are these american made or imports. Because fasteners is something that i would take a chance on. i know ARP is all american made product with high quality steel with lots of carbon in it which makes it tough as nails. I would love to be your next customer but i would need to know where they are made.



Made by ARP in the states.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top