Thread: Mazworx QR 6spd swap kits

Andreas is in the process of making a proper fitting flywheel that is meant for obdII, Yes the bellhousing can be drilled for the sensor, it has the markings there for it. The flywheel being made will use an off the shelf clutch.

p12 stock flywheel and obd2 flywheel has the same number of teeth if that's what you're asking coheed.

THANK YOU! I am in the process of getting parts together for this swap. I saw a mint Spec V setup from an 04 in a local junk yard so I am thinking of buying everything I need from it! Front hubs, rear beam, brakes, etc as well.

what kind of deal are you getting on it?

The trans is $400, the axles are $50 each, I will have to ask them about hubs and pedal etc.

All Factory SR20s have the same number of teeth on the flywheel. This flywheel teeth thing is only for aftermarket flywheels.

Thanks again MIKO. This will be the next upgrade for my car. Hopefully I don't go bankrupt actually doing it. lol

Will a B13 clutch and PP work with your flywheel on the 6 speed?







bump. I havent seen the clutch that does with that flywheel either...

any new developments on this? any1 run it? is it comparable to the k-series tranny?

you sure? i have a old sr flywheel (91-93?) & a newer one (00+) & one has 108 teeth & the other has 109 teeth