![](/images/threads/icons/0.png)
So i was tired of seeing that ugly and boring regular usdm 93-94 sentra grill.
Things you will need are:
93 Grill
Dremel
Sawsaw
Sandpaper
Bondo
napkins
Primer
paint
patience
Ok so its only took me about 1 hour to do. So I went to the junk yard to get a spare 93 b13 grill so i wont kill my stock one. on to the pictures
So first things first is cut the pieces that let the 2 lines off
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra295.jpg)
tricky part is cutting the middle piece, be careful because if you go to far it wont look nice a
after
Use the dremel for the top layer you need to trim off carefully
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra290.jpg)
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra299.jpg)
here it is both top and bottom lines cut off
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra291.jpg)
Next step, I used napkins to keep the bondo from falling through, ghetto but it does the job.
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra298.jpg)
Next step, Mix the bondo and apply
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra300.jpg)
Next Use the sandpaper and sand it down
After that apply next layer of bondo that didnt cover the first
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra304.jpg)
Let it dry for a bit and take a break,lol
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra308.jpg)
Next step apply primer and paint it
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra316.jpg)
there you go, congrats you made a linear grill.
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra318.jpg)
peace!
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra317.jpg)
Things you will need are:
93 Grill
Dremel
Sawsaw
Sandpaper
Bondo
napkins
Primer
paint
patience
Ok so its only took me about 1 hour to do. So I went to the junk yard to get a spare 93 b13 grill so i wont kill my stock one. on to the pictures
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra285.jpg)
So first things first is cut the pieces that let the 2 lines off
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra295.jpg)
tricky part is cutting the middle piece, be careful because if you go to far it wont look nice a
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra286.jpg)
Use the dremel for the top layer you need to trim off carefully
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra290.jpg)
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra299.jpg)
here it is both top and bottom lines cut off
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra291.jpg)
Next step, I used napkins to keep the bondo from falling through, ghetto but it does the job.
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra298.jpg)
Next step, Mix the bondo and apply
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra300.jpg)
Next Use the sandpaper and sand it down
After that apply next layer of bondo that didnt cover the first
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra304.jpg)
Let it dry for a bit and take a break,lol
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra308.jpg)
Next step apply primer and paint it
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra316.jpg)
there you go, congrats you made a linear grill.
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra318.jpg)
peace!
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra317.jpg)
![](http://i906.photobucket.com/albums/ac263/sr16uly/sentra/sentra321.jpg)