Thread: 92 Avenir W11 wont start

Alright, so I figured I would bring the starter back and have it tested again. This time I brought it to an autozone, and they said that the starter was no good. Just the other day, Advanced Auto said that the starter was fine, so I have no idea what to do?

I took a pair of jumper cables and hooked them up to the terminals on the solenoid, and then tried to start the car that way, but all it did was click. So.... my next questions is, If I took jumper cables to the solenoid and it still didnt start, does that mean its the solenoid that is junk?

By the way, I'm in the process of getting a new wiring harness, distributor, and if its the solenoid, then I might as well just replace the whole starter.

Did you try to put those grounds on your intake manifold? I would shine up every ground you can find, they are pretty important. Go to jump the car and put the pos on the battery terminal and the neg on the the engine somewhere like your intake manifold. If it starts that way then you have a bad ground.