Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: A B15 and P11 Tranny Tid Bit.

+ Reply To Thread
Posts: 1-5 of 5
2008-06-12 01:49:50
#1
A B15 and P11 Tranny Tid Bit.
Here is the B15 Tranny

1. 3.333----14.788
2. 1.955----8.674
3. 1.286----5.706
4. 0.926----4.109
5. 0.733----3.252

FD. 4.44


Here is the P11 Tranny

1. 3.333----13.919
2. 1.955----8.164
3. 1.286----5.370
4. 0.926----3.867
5. 0.756----3.157

FD. 4.176



B15 tranny with 4.176 FD

1. 3.333----13.919
2. 1.955----8.164
3. 1.286----5.370
4. 0.926----3.867
5. 0.733----3.061


I posted this because you can get B15 LSD trannys cheaper than P11 LSD ones. You can buy a Ring and pinion for a P11 new for $300 from Greg V.

Basically you can get a slightlyt beter box than a P11 if you mix an match B15 gears with a P11 FD.

So the guys with B15 gear boxes you can get your gearbox to run like a P11 with a longer 5th gear.
2008-06-12 02:00:17
#2
Damn.... I was wanting to know if that was possible, but didn't know what the numbers would be... thanks for the numbers Dre...

http://www.sr20-forum.com/showthread.php?p=86054#post86054
Originally Posted by XxToKeSxX
Rodrigo/All...

I gave up on the find for a p11 for the same reasons and bought a b15 trans from a friend for the nx (It was a great deal), but here is my question to everyone. Has anyone put any thought into just taking the trans apart and replacing the final drive w/ a lower ratio? Is this not an option?

Recently I got the oppurtunity to take a trans apart with a friend and came to the realization that it wasn't very difficult to do... why wouldn't just switching the final gear out be sufficient? Why not even switching to a larger diameter tire combo when its time to get nasty with it work as well? I apologize if I'm missing something...

I know the b15 trans gets the brunt of things when it comes to is gearing but isn't gearing a small issue that can be fixed with a little elbow grease, a snap ring tool, a couple wrenches and maybe even taking an internal part to a shop?

Let's Discuss...
2008-06-12 02:44:04
#3
This is what I've been saying for awhile now. but no one wants to listen to me
2008-06-12 03:40:06
#4
P11 gears seem tall... hmmmm. 5th could be taller though.
2008-06-12 06:04:52
#5
Originally Posted by Keo
This is what I've been saying for awhile now. but no one wants to listen to me


I heard you keo... ur quoted in that thread
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top