So I pretty much took the whole intake manifold out of the car after seeing how dirty it was, I cleaned the iacv the throttle body and the whole manifold, and I think I'm going to paint it while its all out, and try to get some cruise control on there (switching to a de throttle body, I'm going to delete the throttle body heater too because its easier to just loop the hose than to adapt the bigger hoses to the smaller throttle body)
It was the longer curved hose that was leaking, I hope nissan ordered the right one (wouldn't be the first time they got parts wrong), do I need to leave them vacuum things there, they are just zip tied on the coolant lines
A also traced this white wire to the knock sensor, I'm guessing it shouldn't look like that, I'll probably solder the connection together
It was the longer curved hose that was leaking, I hope nissan ordered the right one (wouldn't be the first time they got parts wrong), do I need to leave them vacuum things there, they are just zip tied on the coolant lines
A also traced this white wire to the knock sensor, I'm guessing it shouldn't look like that, I'll probably solder the connection together
Last edited by Mike22487
on 2011-03-11
at 08-09-27.