Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: car dies after coming to a comete stop and has trouble starting afterl

+ Reply To Thread
Posts: 11-20 of 48
2010-08-29 14:55:16
#11
Updated changed maf adaptors to a jwt. Pop charger.idle is more solid but still. Shuts off.recently shut off and burnt out my alternator. Replaced the alternator and still have the battery andbrake light on but now flashes.and holds a perfect charge.will attempt to clean the maf soon
2010-08-29 15:10:23
#12
definitly clean the maf sensor, check grounds, and check your connections.
2010-09-29 13:09:17
#13
Will check connections today.after maf cleaning.it hasn't died on me yet.will let you know.
2010-09-29 16:07:38
#14
Clean the maf and throttle body
2010-09-29 22:43:47
#15
Car doesn't Stall out anymore.only problem is mh brake light and battery right is still flashing.when first one burnt out.replaced.was charging but lights were still on.replaced with another new one now it flashes but not as much as it did wen the first alternator was installed
2010-11-01 17:19:05
#16
Watsup guys. Wanted to update the situation.mafia is cleaned but still stalls on stopping at times.now wen the car is idling it stalls and have to press the accelerator pedal a lil to get it to start.now also at times the car will idle high at 1500 rpm after warm up start.also idle begins to fluctuate from 700 -1500rpm.car drives a lil weird. Also appears. To be burning me gas then usuall. Any help is appreciated thanks
2010-11-01 17:35:55
#17
Did you check your grounds and clean your throttle body? And checked for vacuum leaks? How about for a leaking injector?
2010-11-07 14:05:59
#18
New symptom. While I'm driving.g on the highway in fourth gear I was about fourthousand rpm. Thas around sixty five miles an hour when The car just loses speed and the rpm drops like if I stepped on the brakes.could this be a sped sensor malfunction?
2010-11-13 01:56:21
#19
Update car can't hold idle keeps shutting off
2010-11-13 03:48:14
#20
Replace maf. You have vacuum leaks. Check the line going to the evap canister inparticular. Mine behaved similarly when that line came off one day. Hope you solve your issue...
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top