Thread: ve-t spun bearing

I have rebuilt a de and a gtir motor before with this same ring compressor. I think I know what my mistake is though I think the largest rin goes in the center canal not on top

Got new rings, figured id do things right. .. buuuuuuut the two pistons I inserted and then turned the crank to put the othwr two in they broke the fucking oil squirters im pretty sad right now so I might just remove all the squirters and leave it like that. Because the sr20de-t has no squirters and runs fine

I think de pistons need notched to work with squirters.. I dont think id leave the holes open if I wasn't gonna use the squirters.

I have some det pistons an rods that would probably work great for u an would clear the squirters. Hell I can send u squirters too..

Pm me if interested

Do not run without the squirters, your oil pressure will be f'd. Gotta take your time with this stuff bud. Sit down and read an engine builders book in Barnes and Noble or something. If your top ring won't slide in the cylinder then the ring end gaps are touching, which is a BIG no no or you're just totally off with something. It shouldn't feel any different than the second ring or the oil rings on the way in.

I got them in right now, I can block the holes with bolts I wad thinking. I thought about the pressure getting messed up.

I got them in right now, I can block the holes with bolts I wad thinking. I thought about the pressure getting messed up.

- - - Updated - - -

I got them in right now, I can block the holes with bolts I wad thinking. I thought about the pressure getting messed up.

Hopefully nothing comes loose on ya man.. id loctite some plugs in there.. the kind that sit flush when tight.

I don't think you will affect the oil pressure if it's blocked off. It them open I can see it but not blocked off

Id really like to buy lynchs parts but for now ill see what I can do since funds are limited. Plugs and de internals

i know people plug them things sometimes but you might make sure its not gonna block flow to other things.. if that makes sense..

maybe google an see if you can find any info?