![](/images/threads/icons/0.png)
I recently turbo charged my B13 and the turbo manifold melted a hole in the rubber low pressure ac line. My car was originally a 1.6 liter, then swapped to the SR, then bolted on the avenir T25 kit. I ended up buying a new low pressure line from a NX2000 but it did not fit. I then bought a 1.6 line and it did not fit either. Could someone please help me out? What ac system do I actually have? What ac line do I actually need? Would i be better off getting another compressor? If so, would the high pressure line I currently have work?
Here is a picture of all three lines. From the left: stock (I thought), nx2000, b13 1.6 liter.
![](http://i269.photobucket.com/albums/jj79/philipn126/1308091342.jpg)
This is my stock line bolted to my stock compressor.
![](http://i269.photobucket.com/albums/jj79/philipn126/d920e545.jpg)
This is the NX line up to my stock compressor.
![](http://i269.photobucket.com/albums/jj79/philipn126/f21b1ee3.jpg)
This is the GA1.6 liter line up to my stock compressor.
![](http://i269.photobucket.com/albums/jj79/philipn126/cea9c5b2.jpg)
This is the compressor.
![](http://i269.photobucket.com/albums/jj79/philipn126/dcf45e4d.jpg)
The nx and 1.6 lines both have larger openings than mt stock line and compressor. Why?
![](http://i269.photobucket.com/albums/jj79/philipn126/fe0d2862.jpg)
If someone could please help shed some light on this situation I would really appreciate it. It is hot outside.
Here is a picture of all three lines. From the left: stock (I thought), nx2000, b13 1.6 liter.
![](http://i269.photobucket.com/albums/jj79/philipn126/1308091342.jpg)
This is my stock line bolted to my stock compressor.
![](http://i269.photobucket.com/albums/jj79/philipn126/d920e545.jpg)
This is the NX line up to my stock compressor.
![](http://i269.photobucket.com/albums/jj79/philipn126/f21b1ee3.jpg)
This is the GA1.6 liter line up to my stock compressor.
![](http://i269.photobucket.com/albums/jj79/philipn126/cea9c5b2.jpg)
This is the compressor.
![](http://i269.photobucket.com/albums/jj79/philipn126/dcf45e4d.jpg)
The nx and 1.6 lines both have larger openings than mt stock line and compressor. Why?
![](http://i269.photobucket.com/albums/jj79/philipn126/fe0d2862.jpg)
If someone could please help shed some light on this situation I would really appreciate it. It is hot outside.