Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: The highly anticipated DougFab Intake Manifold with installed PICS!

+ Reply To Thread
Posts: 1-10 of 19
2014-09-07 22:28:54
#1
The highly anticipated DougFab Intake Manifold with installed PICS!
Here are the pictures of the product guys! There are more to come tomorrow of it installed! and Btw im currently only using a 3" short intake pipe with 3" VE maf and 3" velocity stack. Plans are to change to a longer more strait 3.5" intake pipe with 3.5" sr20ve 20V maf (currently have) and 3.5" velocity stack with maybe not even a filter ha! I also have a Doug Fab fuel rail for this baby but don't have injectors yet. I'll get some new injectors a some point also. (Manifold has provisions for the rail already). An amazing piece of ART Doug







Last edited by Haulin200sx on 2014-09-08 at 22-29-32.
2014-09-08 13:52:06
#2
Here are some of the specs: 45mmID runners, 7.25"long runners with 3.5"ID plenum. 12" long plenum.


Last edited by Haulin200sx on 2014-09-08 at 18-19-48.
2014-09-08 22:28:39
#3
and here's the money shots













2014-09-09 11:05:43
#4
What TB is that?
2014-09-09 15:42:28
#5
The highly anticipated DougFab Intake Manifold with installed PICS!
90mm/ 3.5" universal TB


Sent from my iPhone using Tapatalk
2014-09-10 09:39:22
#6
Looks tidy as! Look forward to numbers
2014-09-10 10:40:31
#7
Not running coolant lines into the matrix?
2014-09-10 17:54:28
#8
The highly anticipated DougFab Intake Manifold with installed PICS!
Not for now..... The bottom hose won't go on at the moment. FYI guys Doug made this at his shop without a test vehicle and went off the measurements I gave him. He did dam good I'd say!


Sent from my iPhone using Tapatalk
2014-09-11 18:10:13
#9
Cruise? Any interferance with any of the hoses/hardlines that are run along the firewall? How would this look with a turbo, given the need of a curve there for the intake?
2014-09-11 22:33:56
#10
Originally Posted by canx2k;996412
Cruise? Any interferance with any of the hoses/hardlines that are run along the firewall? How would this look with a turbo, given the need of a curve there for the intake?


This manifold is basically bare bones version.

on the back side of intake is a throttle bracket and a vacuum block. but we did not fab a angle on the end or any cruise brackets.

I just finished a roller rocker intake that I will post pics up shortly. to give better idea of diff intakes.

soon to be finishing a few VE intakes also
+ Reply To Thread
Quick Reply
Thread Information
There are currently ? users browsing this thread. (? members & ? guests)
StubUserName

Back to top