Thread: Help need plz

I. Have a b13 so I did a little brake upgrade I put some ad22 on the front which I had on for three year now I told the drum brake off an add on sss bluebird which I got from a friend car I change new disc pads an bleed all four brake but I still not getting any brake so I change the master cylinder too an new one an re bleed it but it hold then the pedal go to the ground can u plz help

Did you bench-bleed the new master cylinder? It is extremely hard to get all the air out of the system without first benchbleeding a new MC.

No I didn't I just bolt it up then add some brake fluid. And how do u bench bleed it

Not a Nissan master cylinder in this video, but the same concept.

Thank it help a lot.I got some brake but it start to creep so a friend told me to check the calipers if the piston show any sign of licking which it is. It have a small swating so I think I should either change the seal or the calipers

hey Javon, pick up a power bleeder. if for whatever reason you get air in the mc you don't need to bench bleed it if you have a power bleeder. power bleeder also works great for normal bleeding too.

http://www.amazon.com/s?ie=UTF8&page=1&rh=n%3A15684181%2Ck%3Apower%20bleeder

Thank to of u guys who help me brake up an working good