Thread: Weel spacers question

Hey guys I'm considering some 20mm spacers for my b13/n14. Now, is here really a difference between the ichiba and the other non branded, but still hub centric spacers sold on ebay? The ichibas are double the price. I'm referring to the spacers that bolt to your hubs and then have their own studs for your wheels to bolt onto.

Like these :

Hubcentric Bolt on 20mm Wheel Spacers Nissan Pattern 4x100 CB 59 1mm 12x1 25 | eBay

In theory there is no real difference. In practice...

For safety reasons I would go with a reputable wheel spacer distributor like H&R. Theirs are at least hubcentric and you know they are specifically made to fit. If cost is an issue buyer beware, at least do your homework on the company that makes the spacers.

I bought those ones in December and haven't had an issue with them. Unijabnx2000 posted a pic of my aztec red NX2000. http://www.sr20-forum.com/nx2000/66942-best-looking-wheels-nx.html. I am not sure if the b13 ser is different than the NX. I got 15mm front and 20mm rear I have room for 20mm front and 25mm rear on a +40 offset rim. hopefully that helps.

By those ones you mean the non branded, yet hub centric ones correct? For piece of mind I'm leaning towards the ichibas or something but unless there are significant differences in the alloy used, or in the strength of the studs or something those spacers look identical to the h&r and ichiba ones.

As for your car thanks for the link and info. Yeah seems like there is room for 20/25 for sure on these chassis. I'm considering doing a 5x114 hub conversion and just getting some aggressive 17x9 Rota Grid wheels perhaps.

yes the ebay no brand ones you posted in the first post are the ones I have. your welcome