Thread: Need wheel spacer help

15x8 +40mm and you add a 19mm spacer makes it=

15x8 +21 offset

I had 8" +37 wheels in the front with 205/45/16 tires....you will be farther out and have meatier tires

Probably look similar to this.....15x7 0 offset (keep in mind this guy pulled the crap out of his fenders, and had jic upper links to add negative camber)

19mm spacers 4x114 hub centric to P10 and 4x100 wheel centric to 15x8 6UL with 225/50-15 Falken 912



front:


rear:


I have a set of mud flaps from my G20t that I am going to try next.

It sure is a lot of tire on a P10. I'm thinking some fender flares are in my future as well.



Time for the VE and 6 speed!!!

Hmm undecided whether I like it......Pretty tough looking,but maybe a little too much for my taste.Not hating,it's your car,so do what you will,just throwing that out there,
No way you can go lower with those either.
Did you have to go out 19mm front and rear for brake clearance,or struts or what?

19 was the thinnest they would make the spacer, and it clears the stock rear spring perches as well

Oh,I didnt notice its an adapter for 4x100 to 4x114...Thats why it has to be that thick.

I don't know who you went with for the spacers, but I've heard of a company (I think on a MotoIQ article) that will make bolt pattern changing spacers as thin as 5mm if I remember correctly. I'll look for the article. Sorry for no mentioning it earlier.
I don't know if they are hub centric/wheel centric though.

I think they were Project Kics spacers (sold by Evasive Motorsports). They have aluminum spacers as thin as 10mm and I believe if you call them they will do bolt pattern chaning ones. Hub-centric rings are available.

Project Kics Wheel Spacers: Evasive Motorsports | PH: 626.336.3400 Mon-Fri, 9am-6pm PST

I swear I heard about a thinner spacer made of steel possibly by the same company. I'm still looking...

Okay here is the exact steel spacer I remember. Made by Project Kics. Sounds like I should have recommended these to begin with. =(

Project Honda S2000 Part 3- Brakes that don't Break



That one is 10mm and doesn't change the bolt pattern, but I believe if you asked nicely they might be willing to do that, and hook you up with hun-centric/wheel-centric provisions. It would be worth a call I think at least. That is of course if you have room inside between the tire and the spring perch, and you want to pull those babies inboard some.

Def. need some Rally Armor mudflaps for that!

My Legacy wagon looked like that when I put on some 15x7 Beretta GT wheels, back in the day.