ivanorcan's Likes Received

Guys i would be willing to buy those 2 gears if we decide on a good gear ratios that will help our cars be faster. What do you guys think about that?
I propose something like:
RPM Shift point ...

Just a question, if we get to do stronger 3rd and 4th gear, can how much would it cost on getting custom gear ratio for those 2 gears? Say something like 3rd gear to 1.456 and 4th gear to 1.200?

The stock SR20VE lower lobes start loosing power at 4500rpm... the car will see a gain on power and even more important on TORQUE if the VVL kicks in between 4600 and 4800, after that... if you act...

3" Exhaust here, made 10whp more than the 2.5" exhaust, with the stock VE engine.

I would put some SR16VE pistons in there just so the cams have a good CR to make their magic.

Im not sure if you will have issues with the flat pistons from the 10.1:1 SR20DE, lets see what the ...

There is a diferent answer if you mean stock longblock or stock shortblock... because if im correct, stock shortblock means you can add cams and lots of goodies to the head...

There is a diferent answer if you mean stock longblock or stock shortblock... because if im correct, stock shortblock means you can add cams and lots of goodies to the head...

Im guessing youll hit the 180whp barrier... maybe 190whp if you add a Vtec badge to the valve cover! Hahahaha, Just kidding my friend!

I dont even want to guess how much whp you will be doing! I...

Some things that needs to be pointed out that i found:
-The SR20VE exhaust gasket works for the 20V header.
-The 20V header have smaller exhaust ports on the flanger than the SSAC but then if get...

Hi Guys,
I installed the header last week and i have to say that you really can feel the diference against the SSAC header. I can feel some gains from the moment the VVL kicks in untill redline. N...

Opened my valve cover and found this!

Why not using the SR16VE stock pistons? I know that would be close to 13.5:1 CR but doing a stroker on a SR16VE to use standar SR20VE pistons... i think is a waste of money, then just buy a SR20VE ...

So i bought new rims for my car!

Kosei K1 Racing, 16x7.5"

http://imageshack.us/a/img708/7500/20130513161115.jpg

Front
http://imageshack.us/a/img823/6213/20130513161140.jpg

Rear
http:...

Hello Guys, i installed my whiteline rear adjustable sway bar yesterday and i wanted to share my thoughts about it. I posted this here so all the information is on the same place.

For the instal...

I will be installing my rear Whiteline swaybar this weekend, i have a 3" exhaust so i will be having fitment issues, but ill try to figure it out...

Will provide updates.

Is not the same for B13, its diferent, i think they are not selling it anymore...

Try the Whiteline is much better.

So santa got a little late to costa rica... look what he brought me yesterday...
http://img16.imageshack.us/img16/6331/20130119134857.jpg

Rear sway bar
One replacement KYB AGX strut
Maxima A32 Ro...

So i changed my headlights for this ones, and also repainted my grill. Looks nicer.

http://img202.imageshack.us/img202/787/28292958447945156778237.jpg

I have been reading about the Franklin 20v/N1 cams... any feedback on that? i also saw that kelford do costum made cams but are they reliable? any thoughts about this?

I would like to get someth...

I installed a new exhaust in my car, 3 inch crush bent exhaust, with a glasspack and a Dynomax Ultra Flow. The car now have more low end torque and pulls harder on top.

http://imageshack.us/a/im...

Hi dude, im friend of MR. 200sx, i talked to his brother last saturday and he told me you were coming. Hope to meet you here. Last time you came i was not able to go to the Shell to hang out with t...

I used to have a cut out but i must tell you, opening it with RPMS its a issue because the electric cut outs does not open very quick i think you should use a switch and if you need to race you jus...

New Engine's Dyno numbers

With that kind of compression ratio you will need big cams and will get more than 200whp. Here we are going to build a engine with that receipe and N1 cams and hopes to get 210whp or more...

Jus...