All posts made by javierb14 that members have liked.
:cool:
Will do
I can work the DE/VE flange and external wastegate options into the design...I'm tweaking the manifold designs in solidworks right now, figuring out what will perform b...
I'll let you know when we start tearing into the miata, starting the design and fabbing prototypes.
On a side note, we are considering using these re-buildable rod ends for these lower control ...
Thanks! I've definitely thought about incorporating a cutout valve into the side exit along with "y-ing" into the stock exhaust. There is plenty of room...just need to find a cutout that works well...
that sure does free up a lot of space! I have an old school 2 bolt flange TiAL 38mm that I can use for mock up...I'll test fit it with a housing when I build the next housing.
Here's the initial ...
working on some screamers for GTiRs...
2.5 in. stock location for the OEM Nissan T28
http://sphotos.xx.fbcdn.net/hphotos-ash4/306505_364318166971944_897609019_n.jpg
3.0 in. stock location for a ...
The bellmouth/stock type will sound very similar to the OEM cast piece. I don't have any video to compare the two though.
Send a couple of pics of the skid plate over and we'll see what's p...
working on some screamers for GTiRs...
2.5 in. stock location for the OEM Nissan T28
http://sphotos.xx.fbcdn.net/hphotos-ash4/306505_364318166971944_897609019_n.jpg
3.0 in. stock location for a ...
Congrats! and I hear yall! Working on runner geometry and orientation right now...we'll see what's possible :)
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash3/537503_350625498341211_13763190_...
Awesome, thanks for the offer :bigthumbup: Can you pull the part number off that compressor?
We had something similar in mind for the divorced setup. With that design, my biggest concern is poten...
A few images of the latest divorced j-pipe/turbine housing rev.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-snc6/178971_338923166178111_170000483070381_766343_623090926_n.jpg
https://fbcdn-spho...
the divorced turbine housing/j-pipe for the VET is tacked and ready for welding...and that's a 3.0 in. 3 bolt flange in the stock location :D
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/154512_...
the divorced turbine housing/j-pipe for the VET is tacked and ready for welding...and that's a 3.0 in. 3 bolt flange in the stock location :D
http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc6/154512_...
Quick update...the first manifold was completed and shipped last week. We are building 2 more right now, 1 for my B13 and another for shelf stock!
http://sphotos.xx.fbcdn.net/hphotos-prn1/560331_3...
Working on another bellmouth j-pipe for a bluebird setup...almost done
http://sphotos.xx.fbcdn.net/hphotos-snc7/577648_310261739044254_170000483070381_726922_1709574810_n.jpg
and, the start of a ...
there's a design in my head, but I don't have the fab equipment require to build it yet. the design is a little outside the box but function and form will be top notch!
my brothers and I will be f...
Tacked up a GTiR bellmouth for a - member earlier today, should have it done in a couple of days.
https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/294464_178330368904059_170000483070381_38508...
Almost have a GTi-R screamer part done!
http://turbofx.net/wp-content/uploads/2011/07/gtir-o2-hsg-screamer-01.jpg
http://turbofx.net/wp-content/uploads/2011/07/gtir-o2-hsg-screamer-02.jpg
http:/...
A few more pictures...
http://turbofx.net/wp-content/uploads/2011/07/gtir-recirculated-down-pipe-04.jpg
http://turbofx.net/wp-content/uploads/2011/07/gtir-recirculated-down-pipe-05.jpg
http://tu...
Bellmouth design almost finished, just need to weld up the 3 bolt flange and then surface the part.
http://turbofx.net/wp-content/uploads/2011/07/gtir-recirculated-down-pipe.jpg
http://turbofx.n...
GTiR is taking shape.
http://turbofx.net/wp-content/uploads/2011/06/sr20-02-hsg-gtir.jpg
For those who are interested in screamer pipes, will you be running A/C? Reason I ask, is that dump tube ...
Thanks guys...much appreciated :bigthumbup:
Definitely, fitment and ease of installation are very high design priorities. When the next part is finished, I'll document the install process and t...
Started on the recirculated waste gate design today...went a little different route with the bends.
http://turbofx.net/wp-content/uploads/2011/06/sr20-02-hsg-pie-01.jpg
http://turbofx.net/wp-cont...
You might be able to find the hardware at Maryland metric...they have a nice selection of metric stuff.
MARYLAND METRICS 'HOME PAGE'
The GTiR arms are starting to take shape :)
http://sphotos....
GTiR rear adjustable links/control arms are done!
http://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-prn1/536297_315283878542040_170000483070381_737636_1591537775_n.jpg