All depends on header and intake manifold used!!!
For example my setup with Tri Y header I could activate al low as 4600 with the 4-1 I have to activate cams a 5900 for best results!!
On stock S...
This header will perform better than SSAC since merge collectors flow better and it has the 2in secondaries that its the mod many people do to the SSAC with good results with the 2.25ID Choke a tra...
The end came to this short block!!! :(
Seems like stock rod didn like 9500 rev limiter for a long time!!
http://i646.photobucket.com/albums/uu185/JosePayu/20130805_205913_zpsf0fa405a.jpg
The head you will be using has oversize valves?? What brand piston you are using?
Measure valve to piston clearance also if you have oversize valves make sure pistons valve relieves have a lots o...
According to someone who tested them with better luck than us the best combination its 184-E IN 184-C EX for max power!!
You can order them like that but would be a special order!!! so order them ...
The head you will be using has oversize valves?? What brand piston you are using?
Measure valve to piston clearance also if you have oversize valves make sure pistons valve relieves have a lots o...
This header will perform better than SSAC since merge collectors flow better and it has the 2in secondaries that its the mod many people do to the SSAC with good results with the 2.25ID Choke a tra...
Sorry I am afraid to tell you that Making the stacks longer wont make these make more power!! Maybe some custom stacks with a bigger bell mouth and more tapper will but also you need to finish port...
Do I have to buy the prototype that I will test??
What exactly needs to be tested on these units?
I already have the 4.78 MF final drive
I only do street Driving and Drag racing!!
You can conta...
Contains unread posts
Contains no unread posts
Thread is closed
You have posted in this thread
Back to top