Remember this is a manual car and it has to be shifted by a human and it has to be shifted 4 times jajajaja we are talking here about tenths of a second !!!
There should be a company that produce a more affordable ITB kit for VE than Hayward!!! Spending $3000+ on a ITB kit its way too much when Honda's can get a very nice set for half of that!!
Just my...
Vadim could you do a write up on how to setup the NEMU to get those CVS files to open them on Virtual Dyno!!
Also parts should be tested tuned vs tuned to see the real gains since each part can af...
When they installed the sleeved they decked the block and the piston top not the crown just the border on the 92mm piston comes above the deck at TDC and the issue is that the PE mazworx 90mm headg...
When they installed the sleeved they decked the block and the piston top not the crown just the border on the 92mm piston comes above the deck at TDC and the issue is that the PE mazworx 90mm headg...
Contains unread posts
Contains no unread posts
Thread is closed
You have posted in this thread
Back to top