Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: b 14 ve, ve injectors, ve maf, ve injectors. super rich

+ Reply To Thread
Posts: 1-5 of 5
2012-11-14 00:04:50
#1
b 14 ve, ve injectors, ve maf, ve injectors. super rich
I don't have a wideband yet. I keep forgetting to save a log file but I'm running super rich. At idol I'm at .8v on o2, maf is 1.0 tps is .48. I have messed with maf and k values, and latency. The tune I'm using is one that downloaded off your sight. I have only managed to make it worse. I thought the ve maf should be around .5 v at idol . The k value on my old calum rtv2 bin was around 38k. I'm at 5,000 feet elevation. Any ideas on problem? It ran lean but idoled much better with the de maf and ecu. I have checked all mechanical problems.

Sent from my HTC One™ S on T-Mobile. America’s First Nationwide 4G Network.
2012-11-14 03:08:13
#2
Originally Posted by Dalocsr20
I don't have a wideband yet. I keep forgetting to save a log file but I'm running super rich. At idol I'm at .8v on o2, maf is 1.0 tps is .48. I have messed with maf and k values, and latency. The tune I'm using is one that downloaded off your sight. I have only managed to make it worse. I thought the ve maf should be around .5 v at idol . The k value on my old calum rtv2 bin was around 38k. I'm at 5,000 feet elevation. Any ideas on problem? It ran lean but idoled much better with the de maf and ecu. I have checked all mechanical problems.

Sent from my HTC One™ S on T-Mobile. America’s First Nationwide 4G Network.



Email me the calibration you are using and if you can get me a TCL that would be good as well!

John
2012-11-15 14:17:25
#3
If your maf is at 1.0v then its hitting the "low maf enrichment point" and running pig rich.

You will need to lower it some to maybe .7v and go from there.
2012-11-15 23:22:58
#4
Originally Posted by Haulin200sx
If your maf is at 1.0v then its hitting the "low maf enrichment point" and running pig rich.

You will need to lower it some to maybe .7v and go from there.


Ya. Nothing I do gets it bellow .97. I know the maf is what's to high but can't pinpoint the problem
2012-11-15 23:28:41
#5
Originally Posted by Haulin200sx
If your maf is at 1.0v then its hitting the "low maf enrichment point" and running pig rich.

You will need to lower it some to maybe .7v and go from there.


Ya. Nothing I do gets it bellow .97. I know the maf is what's to high but can't pinpoint the problem
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top