A little NismoTronicSA Dyno Testing (SR20DET hx40 video inside!)
Here is a car we did today on the NismoTronicSA software.
The vehicle was converted over to speed density using an OMNI 4 bar map sensor and GM IAT.
The final results were 560hp/400tq on 25 psi on E85 fuel.
We also added a switch so he can run a 93 map for low boost just by flicking a switch.
When the ECU senses the switch has been enabled it switches to the alternate fuel and ignition tables for 93.
The vehicle was converted over to speed density using an OMNI 4 bar map sensor and GM IAT.
The final results were 560hp/400tq on 25 psi on E85 fuel.
We also added a switch so he can run a 93 map for low boost just by flicking a switch.
When the ECU senses the switch has been enabled it switches to the alternate fuel and ignition tables for 93.
Last edited by JKTUNING
on 2013-04-25
at 02-45-43.