Thanks everyone for all the help!! I got it working (I think).
#3 injector was toast. o-rings shredded, and the injector was slightly warped just underneath the nozzle. Check it out:
I also found a used MAF and replaced mine.
A few things I still have to do:
- Change the oil
- gap the plugs properly
- get a smog
Some concerns I still have:
I drove it pretty hard on the freeway for a bit and then as I was driving back to my house it stalled on me a few times.
Also, there's a little oil on the bottom of the plug wire on #2:
I also don't have any experience with distributors, so here's some pics. If y'all suggest replacement of any of this, I'm on it.
Is this burnt up?
A little bit of oil leaking from the bottom of the distributor:
I can't tell if this looks worn down... the design of the cap is just funky, I think:
And there's a tiny bit of oil on the outside of the cap, but none inside:
Aaaand here's #3 plug all clean!
Again, thanks for the help y'all!!
#3 injector was toast. o-rings shredded, and the injector was slightly warped just underneath the nozzle. Check it out:
I also found a used MAF and replaced mine.
A few things I still have to do:
- Change the oil
- gap the plugs properly
- get a smog
Some concerns I still have:
I drove it pretty hard on the freeway for a bit and then as I was driving back to my house it stalled on me a few times.
Also, there's a little oil on the bottom of the plug wire on #2:
I also don't have any experience with distributors, so here's some pics. If y'all suggest replacement of any of this, I'm on it.
Is this burnt up?
A little bit of oil leaking from the bottom of the distributor:
I can't tell if this looks worn down... the design of the cap is just funky, I think:
And there's a tiny bit of oil on the outside of the cap, but none inside:
Aaaand here's #3 plug all clean!
Again, thanks for the help y'all!!