Originally Posted by
LpSR20DET i have to get the Tee, adapters, and hoses i have everything else.
Also @Dala did you delete your EGR or did you plug it off?
My car has a JDM imported engine, with no EGR from the factory. If I had EGR, I would delete it if it's allowed in that state. Search the forums for "EGR delete"
Originally Posted by
LpSR20DETI meant the block not the actual upper pan. As far as the tb coolant line, I only see one and the other two are the heater hose, should I feed from the pipe then drain to the tb?
Do you have a high-port SR20DE? In that case, you have no throttlebody coolant lines from the factory. You can solve the coolant lines in many ways, some people tap into the radiator hose connectors on each side of the block (drill/tap the alum.), or tee it into some already existing wires like heater matrix.
It doesn't matter from where you take your feed/return for the coolant lines, 170 deg coolant is gonna be refreshing for the turbo anyhow
Search around for "turbo coolant hose"