Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: Clutch pedal needs adjusted

+ Reply To Thread
Posts: 11-14 of 14
2011-11-23 20:48:21
#11
^^What he said^^
2011-11-27 23:42:42
#12
thanks for the info. i just gotta get the pedal to stop with its delay of popping back up from the floor the pedal itself may need a new spring. it takes awhile for the pedal to pop up between shifts which is wut im not liking. i tryed wd 40 its helped alil bit but not much.

~Fuzzy
2011-12-03 20:32:32
#13
Originally Posted by 95b14
just spray the lube inside the black insulation that the metal cable itself runs through. You'll have to remove the cable to do this properly since one end has to be above the other so the lube flows. You can buy specific cable grease from a motorcycle shop, but its really over priced. Just use the lube Pretty White used.


hmm...so i thought part of the reason that it gets stiff is the bracket moves, thats why Dre has his bracket that bolts down in a alternate location. Keeping it from moving & flewing.

but im gonna give this a shot, before i jump to that,since this is cheaper.

Sorry to thread jack.
/threadjack
2011-12-03 22:28:18
#14
Originally Posted by enohand
hmm...so i thought part of the reason that it gets stiff is the bracket moves, thats why Dre has his bracket that bolts down in a alternate location.


that's one reason it does it so with the bracket and a properly lubed an adjusted cable life is good!!


i got one on my car with an low mile cable. helps too to run the lightest pressure plate you can for your power goals. i.e. don't "overclutch" the car.
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top