All posts where sss4me has been mentioned by other members.
1 |
sss4me my head hurting loooli just read over i dont see the lash on kelford site how did you do the calculation #2 is that 40.40mm you measure the intake high lift? can you calculate or teach me ho...
sss4me
Hey Enzo,
Ok, we got everything connected to the car already,Nismotronic is fired up and running well, but the car is not firing up. initially we had a problem with the CAS wiring which...
sss4me you already sold the 4.4 FD of the stock 16ve gearbox? im looking for one.
thanks.
Thanks KillerKrossover! You have not only helped me but helped many others who are puzzled as well! A virtual pint on me!
Now, what metal gasket does sss4me have then? since he is saying his is ...
i have the vet metal head gasket (1.6mm), but have seen lot of builds with normal sr16ve pistons and n1 cams with no contact. you got a picture or part number for your headgasket? you seen confuse...
Thats what i am puzzled about sss4me. The gasket which i purchased stated VET by the seller and when we used a caliper, it showed 1mm thickness, i was kinda puzzled. its a 3 layer metal gasket, 0.2...
there's nothing wrong with their measures at all, but the rocker arm ratio's they use are only 1.6 . there are 4 different rocker arm ratio's for the sr20ve, and both the intake ones are more than ...
sss4me the kelford cam have more lift and less duration that is advertise?
Thanks for the info sss4me and mercado ser i did have the fuel lines backwards, I re ran my iacv seperate from my brake booster and switched my fuel line and bam it started right up. I didnt remem...
The internet makes it easy to misinterpret peoples actual thoughts sometimes,so I tied my best to not read deep into things posted online.
That being said...I truly only offered advice to help bas...
right on, i was looking at turbo mufflers before you posted this up. my concerns are though #1 zero sound clips though i do know turbo style mufflers are WAY quieter than straight through for obv...
LikeTheMovies
sss4me
Vector
Dave_SR20
JimR
gtswrx
UNISA JECS
jagy
Gentlemen, we are approaching the one year anniversary since this group buy began. All we are waiting for are simple...
No, you are mixing two things - exhaust size and collector choke size. Anything over aprox. 2.5" choke will lose big numbers. Size after the choke is different story. ;) I do like 3" exhaust idea, ...
http://www.sr20-forum.com/driveline-fs/72501-b15-lsd-transmission.html
I think he means to stay away from the Phantom Grip units. Those things have been around forever and has also earned themselves nicknames like "Random Slip" or " Random Grip"
Turbocharging these...
deff upgrade fuel system so no matter what level of power you wanna run you will be covered.
I would modify your gtir mani for external gate Tial 38mvs would work well. port match manifold to V...
sss4me - What do you mean?
lynchfourtwenty - Have you used the FX500? I have an ACT Stage 4 now, and I've pretty much loved it, but it's been put through the ringer already. Also, I'm already ...
I agree with Payu or Kojima.
Any word from Mike?
How about the rest of you guys that put a deposit down?
LikeTheMovies
sss4me
Vector
gtswrx
JimR
jagy
Input or thoughts fellas?
Here is a quick video for you guys on how/what to change when you need to get up and running on a different MAF/injector than your base TCD.
http://youtu.be/t4GL4RxJdCc
lynchfourtwenty sss4me Vad...
Thanks, I will do some homework and look into this set-up
For autocross, you would want the extra low-down grunt that the 2.0 will provide. Most auto-x courses are pretty tight and don't allow for a lot of high-revving opportunites. If you can get the 1...
1 |