cayman_primera's Likes Received

With the stickier tires the hubs will wear down faster so that might not work. just my 2 cents but still worth a try.

It made no noise what so ever and movement was actually really bad. what gave it away was i stated to hear a click when applying the brakes, so i went to inspect the pads(or shoes in my case) and...

About time! glad to give a push:bigthumbup: I found the same thing when I did my panhard bar. No longer was I trying to setup the rear, as the rear is doing its job better than the front. I am ...

I feel that it would be better if I re-drilled the UCA mounting holes like you did to increase the angle and gain some camber there rather than using the LCA to gain neg. camber. My funds are depl...

I will see how it goes. Drilling through grade 8 hardware is not easy. I got some spare bolts that I can test. I think I may just invert the bolt. I can then out the lock nut and lock washer wit...

I made a a sort of U bracket that bolts to the original spot on the third link then the heim link connect to it.
https://lh3.googleusercontent.com/XHx99cR41d_gniKabqmANafMDwto1RS-K9K9pfLVoFkYvb0U-...

I hope these images work, Test fitted the arms last night which took some time removing hub etc. and drilling them out for the 3/4" bolt. overall very happy with the results but have a few snags w...

My goal was to actually just correct the Roll Centre and did not give much thought to camber gain. By the looks of other RCA kits, increase neg. camber is a given since the arm is now more horizo...

All welded up and painted. Just need to fit the OEM bushings and drill out the hub to fit 3/4" bolt. Cant wait to get the car running on these!
Should firm up and reduce the body roll. Will be l...

I use 20mm spacers with the 255/40-17 setup on g35 17x8 +32 wheels and still just rub on the inside. Not a huge issue. My setup now makes the car very neutral when I use the same size tire all ar...

sample video of the April event
https://www.youtube.com/watch?v=vZyu1LpPvTE&list=PLBBhf4-0ocLEvQGLMQyw7Ak4zW3QZoOHX

And another quick sample video for this past event on Nov 6th when I ran with t...

Got Third Place in the unlimited class with the r888 and for my first time with um that feels really good. Competition was tight and I was in a field of lightweights! Says a lot.
Need to setup a...

Ye it was fairly level, Got 1.4 and 1.5 left and right.
https://lh3.googleusercontent.com/8iSL6UPMd5Z_kKpx-WWQlbVSPnxnlQVA5l0dPL6LFCbyMkW6KuweTo5LYFnbHaQz0V8ZT466tlJydL0w-bPvu_THKSFuk-8rVNiIRwtw...

Just replied on my thread, but measurement were around 1.4 - 1.5 negative. I am about 2 to 2.5 inches lower than stock, would be nice to know how much exactly though.

Holy crap, how did I not think of this! I am going back to my stock length UCA to have less static camber for more straight line traction, accelerating and braking. So I can give this a shot as w...

Thanks guys, It is true Kyle, an experienced driver who master their car is a weapon in itself. A lot of the new comers always start to talk about doing this and that before trying to improve th...

Hope this helps, black is the bracket and reds are mounting locations. So there are a good amount of bolts holding it steady and a lot of triangulation.
https://lh3.googleusercontent.com/-R-Bqhr...

Panhard bar was the best mod so far, although short it is still great and the rear can go low until the tires rub the fender and still handle well. the front are a different story, but I plan to s...

Just figured I would bump this thread back to life. Not much has happened to suspension since the rear panhard bar, but just to lay it out setup is below which most of it is in this thread somewhe...

March event saw few ppl show up to race but we went anyway and setup a "fast" layout. did get up to 50+ mph and average maybe 30-35mph.
Also wanted to post these two pics to show the difference wit...

The other PIC was not hosted by me so the person must have moved or deleted it. Should have saved it! dang it. 600lb on the front feels pretty good, But my car is very harsh because of other fact...

The other PIC was not hosted by me so the person must have moved or deleted it. Should have saved it! dang it. 600lb on the front feels pretty good, But my car is very harsh because of other fact...

Scott Russell link is now in the past. Did what I was contemplating for the longest time and used the existing points to install my panhard kit. so the rod is shorter than what 2j racing installs b...

Scott Russell link is now in the past. Did what I was contemplating for the longest time and used the existing points to install my panhard kit. so the rod is shorter than what 2j racing installs b...

July Time Attack