All posts made by Dudeman258 that members have liked.
1 |
Hey VMK,
What is your base timing??
I can grab my current bin for you (200+ whp), but it is pretty similar to those already posted. If your tuner thought 20deg timing adv at wot on that first...
Your above calculations look within the ballpark to me. With the cam your major/only concern is going to be inlet valve open time or number of degrees open. This will determine when the pressure wa...
Update: Ignore the above, I just found the AEMPro user guide and I need to read through it tomorrow before asking any more questions without knowing what I am even asking. I'll leave the question t...
For those of you who are spectacle as to the effectiveness of the asp header, how many of you have driven with one on your motor?
There is no need for dyno charts at all, I went from a ported SS...
The whole break-in period thing is BS.
If you want to cause as little damage to them as possible, use assembly lube at best or engine oil all over the damn things for their first start.
Idlin...
The whole break-in period thing is BS.
If you want to cause as little damage to them as possible, use assembly lube at best or engine oil all over the damn things for their first start.
Idlin...
I just used a shorty belt between the water pump and crank. No dummy/tensioner needed. Been DD'ing it for the past 2 years that way. As for the rack. There is no need to keep fluid in the rack. Onl...
You can try it. ECU should pull timing back to dial out the knock if everything is stock and plugged in. You might end up doing more harm then good since the reduced efficiency of the overly retard...
Putting this in here in case anyone else stumbles upon this thread...
canx2k and I both have the Honda OBD0 AEM EMS S1 PN# 30-1080
Changes needed so far:
1) Make jumper between OBD0 and OBD...
I like your style :bigthumbup:
I like your style :bigthumbup:
Strongly considering making this trip. I am just north of Charlotte BenFenner unijabnx2000. I have added myself to the shared map.
The VE has made it back and fourth to Maine many times, but sti...
Wow. What a sad thing to hear. Only met him a few times back when I was first getting into SE-R's. Currently rocking a B14 tranny he sold me back in 2005! He was always a great person to chat with ...
Yeah this whole thing is pretty funny.
I'm in North Carolina and it started snowing enough so everything was covered in water then it all froze, then snowed more. Left the pretty typical ice wi...
Yeah this whole thing is pretty funny.
I'm in North Carolina and it started snowing enough so everything was covered in water then it all froze, then snowed more. Left the pretty typical ice wi...
Yeah this whole thing is pretty funny.
I'm in North Carolina and it started snowing enough so everything was covered in water then it all froze, then snowed more. Left the pretty typical ice wi...
Not to be a downer but this is just a bunch of marketing hype. I could render a model that looks like an engine and say it makes 1000hp in 1 hour. Nissan tells us nothing about the engine but for p...
Not to be a downer but this is just a bunch of marketing hype. I could render a model that looks like an engine and say it makes 1000hp in 1 hour. Nissan tells us nothing about the engine but for p...
Technically running the hottest plug that you can will be best. A colder plug has a larger ceramic element to avoid overheating under higher power applications. That larger element will soak up hea...
Your timing will be much higher then 10deg due to interpolation and your base timing. Hard to read but that looks to be around 20+deg. At that RPM mean piston speed is down so you could very possi...
Well, in my humble, honest opinion (which I am happy to share but generally get bitch*ed at for expressing).
Answer:
Because just from looking at these I am estimating the overall length is bel...
I would suggest an 8cw crank, it is overall a much better design and will result in a smoother engine and less overall bearing ware.
That said, both are proven to do a fine job for hundreds of ...
Another great find. If only this forum instituted a "rep" system.
Dudeman
Rookies don't use nitrous oxide!!!
Walker
I would like to add that there is a correlation between a smooth ride and a well made damper. Many assume a harsh ride means "race" which is not the case. A well made damper will feel better on smo...
1 |