Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: My VE build. ACL, ARP, P&P, SUPERTECH, etc

+ Reply To Thread
Posts: 11-20 of 64
2014-03-25 23:06:47
#11
I have a E8 in my B13. Works excellent no issues. The E8 has outputs that can activate the VVL. Haltech USA can prob guide you to tuners in your area
2014-03-26 16:40:58
#12
Originally Posted by AutotechMotoring
Originally Posted by det-ser92
yeah me too.. Haltech isn't too popular here in the states, lotta Australia I've been told. I've seen a few rwd sr haltechs, but idk how they like to use it.
I'll be keeping everyone posted.

I am getting new pistons, cp or wiseco 86mm 12.5. Just sold a car to get em..



We currently have a good deal on the pistons CP if you are interested.



I am VERY interested... what's the deal?

- - - Updated - - -

Originally Posted by Dave_SR20
I have a E8 in my B13. Works excellent no issues. The E8 has outputs that can activate the VVL. Haltech USA can prob guide you to tuners in your area


I also have the n14 jumper harness with it, will that help?
2014-03-26 16:44:02
#13
I'm guessing you're using the OEM Harness with the jumper into the Haltech? If so you will have to see which of the auxiliary wires are not in use between the Haltech and jumper and set that to activate the VVL
2014-03-26 18:23:46
#14
I have both a VE harness, and a 92 DE harness.. I can modify either to make work. I'm emailing haltech now
2014-03-26 18:46:37
#15
Use Haltech's flying lead harness and sell your VE & DE harness. It keeps it nice and simple and there's no questioning the condition of the wires. It has tons of options you might not even use. I ran my hatech coil outputs into the AEM Twin fire CDI and converted to direct fire.
2014-03-26 22:04:24
#16
Originally Posted by det-ser92
Originally Posted by AutotechMotoring
Originally Posted by det-ser92
yeah me too.. Haltech isn't too popular here in the states, lotta Australia I've been told. I've seen a few rwd sr haltechs, but idk how they like to use it.
I'll be keeping everyone posted.

I am getting new pistons, cp or wiseco 86mm 12.5. Just sold a car to get em..



We currently have a good deal on the pistons CP if you are interested.



I am VERY interested... what's the deal?

- - - Updated - - -

PM Sent
2014-03-27 10:47:35
#17
@mirrortints runs haltech.
2014-03-27 17:17:58
#18
I'm trying to upload pix for this thread but a 5 min task has taken 20 min so far. .I have to go to work now.. I'm going to measure my bore before I order pistons, then assembly will begin
2014-03-28 06:06:22
#19




The goodies...
2014-03-28 11:43:36
#20
You have some good stuff there. When you wire up the Innovate make sure to put the signal wire into the Haltech. It will help the turner review the data log with AF
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top