Welcome to the SR20 Community Forum - The Dash.
Register
SR20 forum logo

Thread: A Hose To Remember For The VVL

+ Reply To Thread
Posts: 21-30 of 30
2011-08-17 04:46:43
#21
From rockauto's website:
2012-03-01 16:57:57
#22
This hose works for the lazy s triming required.
2012-04-18 17:10:09
#23
I've been to advanced auto and bennett, and neither can pull up these part# in their system. possibly discontinued? if anyone knows somewhere local in S FL to purchase, lmk
2012-04-18 17:19:37
#24
Advance has it on the shelf. Just go in the back and look for a L hose.

4-5in x 3 feet or so.

There are 2 like that always get the longer one. I cant remember the hose size but just bring a short pc that came with the motor to get the correct size.

Or wait till I get home and I can put up the new part number as I have one at home
2012-04-18 18:29:32
#25
if you dont mind providing the part # and brand name, i'd appreciate it.
2012-04-18 19:14:33
#26
Originally Posted by BaDDiS
if you dont mind providing the part # and brand name, i'd appreciate it.


seriously, how hard is it to find a hose that is.

3/4 ID that is 90 degree
4-5 inches on one leg a
3 ft on the other led

If I did not know what it is I would have measured the pipe that the hose needs to go on, then measure the length I needed, gone down to AA parts and game over.

I just don't get it. What happened to helping ones self.
2012-04-18 19:15:56
#27
there is a pic of the hose in the thread already

2012-04-19 12:47:17
#28
Originally Posted by Andreas
seriously, how hard is it to find a hose that is.

3/4 ID that is 90 degree
4-5 inches on one leg a
3 ft on the other led

If I did not know what it is I would have measured the pipe that the hose needs to go on, then measure the length I needed, gone down to AA parts and game over.

I just don't get it. What happened to helping ones self.


Dre, if you felt that way...why would you start the thread helping out? you indicated you had the part info at the house and would provide, so i waited on you to put up the info.

it's not about helping one's self...its a community you agree to be apart of, if you have the info and was willing to share...what's wrong with clarifying so i'm assured i'm picking up the correct piece?
2012-04-19 16:31:16
#29
Originally Posted by BaDDiS
Dre, if you felt that way...why would you start the thread helping out? you indicated you had the part info at the house and would provide, so i waited on you to put up the info.

it's not about helping one's self...its a community you agree to be apart of, if you have the info and was willing to share...what's wrong with clarifying so i'm assured i'm picking up the correct piece?



Your just want to argue. The same info I gave you above is the same info on the first page, first post of this thread. If you had gone down to AA parts with that info you would have gotten the part with no problem, but some how I know you will see it different.

Originally Posted by Andreas
There is a heater hose that is about as perfect a fit for the VE motor from fire wall to heater pipe under the TB area.

The part number is Dayco 80416.

It is a hose that is 4inches then 90 degree then 36 inches. 3/4 in ID.

Can be found at many Autoparts stores. Here are a few diffrent part numbers

Dayco - 80416, B000C0YPZO, D3580416, DY80416

You trim off 2 inches on the 4inch short side then run it and you will know how much to cut off on the other side. I have been using this hose for the last 6 years on VEs.

2012-04-19 16:45:15
#30
Originally Posted by Andreas
Your just want to argue. The same info I gave you above is the same info on the first page, first post of this thread. If you had gone down to AA parts with that info you would have gotten the part with no problem, but some how I know you will see it different.


there is nothing to argue or that im seeing different...I took the part numbers you provided, and both places could not bring it up. I asked for help on it, and you replied indicating you had one at the house and would provide the info on. I said i'd appreciate it if you did so...and then you rant on about not helping ones self. it's fine though...got what i needed, thank you for your efforts!
+ Reply To Thread
  • [Type to search users.]
  • Quick Reply
    Thread Information
    There are currently ? users browsing this thread. (? members & ? guests)
    StubUserName

    Back to top