All posts where ashtonsser has been mentioned by other members.
1 |
How To: Crank pulley -- Oil Pump -- Spacer (all common combinations explained!)
P10 6 Speed Swap Guide / Writeup / Notes
Not to resurrect and old thread but I've been trying to find out some info on this too. After reading the posts from NI SER-1 and ashtonsser, its a lot clearer now. My only problem is that I can'...
LOL. thread fail.
EDIT: P.S. http://www.sr20-forum.com/drag-strip/10390-great-quarter-mile-thread-1-4-mile-thread-fast-cars-drivers.html
Maybe ashtonsser can update stuff or maybe a PM can be exc...
Topdog781 is this thread for real?
What the fuck is going on around here? Explain yourself.
Edit: I've read your posts in the official 1/4 Mile thread. I guess I understand now. You see the other...
Is chapnutz1 still banned? Think he's used them. ashtonsser used at least 1 BW turbo.
^^^This is still the plan! My goal is to leave around 7pm (in an attempt to miss some traffic) and drive to Texarkana - brilliantly named because it borders Texas and Arkansas. Texarkana is ~5.5-...
b13/14 3 piece front end, for real this time
Or slicks! 😁 I see Ashton on page 1 with a similar setup but a 1.8 60ft for 12.44 ET...and slicks. I want 12's on street tires! ashtonsser what cams?
everyones got their own preference and thats ok.
ashtonsser has turned many guys to the valvoline, not many if any are complaining.
Well, I was looking for twin scroll b/c I found a sweet deal on a 67 trim turbo/wastegate that I want to get, and majority of the better turbos I've seen and been interested in are twin scroll. If...
ashtonsser is there info been gathered on the length of the stainless steel line needed to go to the slave cyl from the clutch master?
After swapping all of the gears in, getting all of the check balls and plugs in the bell housing, how easily should I be able to to move the shift forks? It was fairly easy to switch gears before ...
The passenger axle usually slide right out the carrier once the three bolts are removed, but sometime rust will weld the two together. In that situation, get some wd40 and spray around the area and...
^^ That brings up another question ashtonsser (and 5speed)
How do you go about removing the Axle for the carrier while on the vehicle?? I have took Vadim's and Keo's advice and know how to remov...
ashtonsser , I think you are a bit confused with what I am saying (although, your statements are correct if referring to the driver's side regarding length) as I am NOT referring to axle length or ...
ashtonsser, that is incorrect!
Take a look:
[url= URL=http://www.g20.net/forum/showthread.php?103911-Axle-carrier-brackets]Axle Carrier Brackets - G20 Forum[/url]
And several pics take from the ...
I think ashtonsser should send us his "sentragod" plate so we can put it on Freddy's headstone...besides 'ghettomax', Fred was an OG king for the sr FWD world and did what only what 1 other person ...
I think we might be in the clear with GL-4 Rating :)
Amazon.com: Valvoline vv824 SAE 85W140 High Performance Gear Oil, 1 Gallon: [email]Automotive@@AMEPARAM@@http://ecx.images-amazon.com[/email]/i...
ashtonsser They have already been in a few races with the new P11 transmission. I just wanted to clarify that. it seems like you did not know this.
Yes mounting the shifter and running the cables seems like it will be tricky
ashtonsser I assume you cut a hole to pass the cables into the engine bay?
I had some trouble removing the extra hubs off my other NX so i had to bring them to a press to remove them... and my plan is to drive down this friday
ashtonsser the guy will be there this friday?
User tagging invoked! ashtonsser
C
If you are going to go with rods, and the price VET pistons are going for, why not just spend slightly extra and get a set of pistons to go with those rods?? Talk to ashtonsser about getting a dea...
1 |