jimbo_se-r's Mentions Received

canx2k jimbo_se-r

bump jimbo_se-r

jimbo_se-r The sync I refer to is simply putting the controller sequencer in sync with the engines firing order based on the cam sensor. If you take a look at the timing tables i posted you can see...

jimbo_se-r the idea is to eliminate the stock distributor system. Its a great system stock and can provide a lot of spark for high horse power builds. Its antiquated though, and digital control of ...

I was going to say "AARP member"... but I had a change of heart and removed it and left that open like a Mad Libs for fun. And along with the fact that another member of the AARP organization is in...

I'll post some videos/pics as soon as the GPS module shows up (should be sometime this month)

jimbo_se-r , The arduino application can easily be modified to utilize other means of speed measurem...

Cool design...money sent...from serious1tx...XL...I'll drive from Texas to pick up ;)

No Facebook here either jimbo_se-r but I see that I'm missing out on some hoarding opportunities because of i...

Well, like I said, I have a very short commute, so all I saw when I immediately hopped out of the car to take a pic was the two warm spots there forming. The pic looked fairy similar, it just wasn...

jimbo_se-r ; A car sitting still, does not exhibit the true airflow effects within the engine bay and over the vehicle. Once the vehicle is in motion, those stagnation temps may or may not be the s...

jimbo_se-r , The lip needs to be, at a minimum, as tall as the height of the highest slat. And yes it does make a difference. It's all about manipulating airflow and direction.

Below is a very il...

I have not received any new inquiries or orders on these but let me see what I can do to get some made.

any update on this jimbo_se-r

OK, first, I had a typo in my post above and it has been quoted a few times here. I had B13 three times, the middle one should have been [color= COLOR=#FF0000][b]B14[/b][/color].

Now, you said ...

...maybe you jiggled a 20yr old wire the wrong way? Did you get the battery and the alternator tested as you indicated?

here is my thing, how can everything work correctly with 1 alt, but not 4 others?!!? this lead me to believe it cant be a system or wiring issue.

Little smiley faced guy holding a sign that says BUMP. ;)

Can't see at work jimbo_se-r so can you describe me your post picture lmao

jimbo_se-r nothing against CS as I loved their stuff and miss Pat (not sure if his sn has change) but Autotech also has them (they So. Cal.). I've been thinking of getting one also. Haven't purchas...

I didn't think any of the Custom Steel pieces were still available...

Autotech is also a vendor for this site...

Found the GSpec part, for future reference, it is here: custom steel Oil Relocation Block (w/90* filltings) sr20

I've got plenty of line and fittings from when I bought the original Tomei one, ...

jimbo_se-r Autotech on this forum!!!

I have one if u wanna see/check it in person...

Nissan SR20DE, SR16/20VE, Bluebird DET FWD Oil Block Adapter - Engine - Autotech Motoring

To be honest jimbo_se-r I've been nervous and unsure to do it. I do though, beat the hell out of the motor to make sure if it'll go, it'll go then lol. I thought I was getting a deal on the nx but ...

jimbo_se-r

Sensor ground and ecu ground are different. Think of it as a reference ground. Grounds are always passing current so there is little changes in voltage at ground. Just because something...

Correct. I will PM you some actual log entries in the AM if that would help.

Thanks for the detailed information jimbo_se-r.

To get the simple stuff taken care if, you were receiving forum e-mails in the past, yes? But are not receiving them now, right?