All posts where Doug Fab has been mentioned by other members.
Setup up is on its way from Doug Fab. It will be exiting through the bumper, in front of the passenger tire. Here is what I have for it so far.
https://farm9.staticflickr.com/8700/16750262937_56...
I think Doug Fab has experience with both resonator types.
As soon as I get this installed Ill try to upload a video with some decent sound. I wanted as quiet of an exhaust as possible, so Doug Fab built this for me. Here are the specs
- VRS 3" Piping Ki...
Here is the setup that Doug Fab fabricated for Maria. He used a regular "tee" setup because a "Y" would not have fit with the setup.
https://farm9.staticflickr.com/8735/16694427108_f1473e8e3c_o....
Doug Fab Can you post some pics?
Doug Fab can u elaborate on this man? Whos doing it right? How should we be doing it?
well in the accident the 2 fittings i added to the manifold hit the lip on the firewall an created a pretty good leak, not to mention doing a top feed rail upgrade free'd up an extra vac port, so i...
Double win of header failure, lengthy story ahead.
Got the rest of my goodies from Doug Fab whoohoo!
http://i1317.photobucket.com/albums/t631/lynchfourtwenty/joshs/20140408_174131_zpsadoj8d9t.jpg
And ofcourse some swag!
http://i1317.photob...
Doug Fab, how close is it to that AC bracket?
Precision has a great entry level T3 turbo which is a 5431E. We use this turbo on many Honda B series kits and depending on manifold it has made from 300whp to 470whp. The pricing is great as well ...
Doug Fab, you suck :poke: lololol...just kidding
great guy actually +1 for you :bigthumbup:
LOL I am out of the country so all I can do is plan and dream right now. I have this weekend off so after I catch up on 3 weeks of homework I will give this thread some of the attention it needs.....
I was told the pricing went up on these clutches.. try ebay.. otherwise contact Doug Fab or TRACKFORGED as they are both dealers.. however I haven't seen one cheaper then on ebay but I dont mind pa...
Cool. I just ordered that as well as this:
http://ecx.images-amazon.com/images/I/316SJquCLAL.jpg
Yes sir! Just got it from Doug Fab
SR20GTi-R
marksr20
nsusammyeb
stepuporstfu
Keo
Boostlee daveracer
Doug Fab
any of you jokers game for this...i want one!!!!!
Building a Transmission Gear Cuff for the P11 2000-2002
8 inj setup is over kill for 500. ID1000 will do just fine. Ck out Doug Fab combo setup
root that's awkward, then maybe my purge solenoid is actually bad, I have it plugged in but the code it still popping, I'll clean it with some carb clean, and put voltage to it and see if it opens ...
Doug Fab Hey it looks like the MAF was the issue, I took the old one out and the little circuit board inside the square housing on the MAF tube that is supposed to be connected to the connecter was...
Doug Fab that makes a lot of sense actually, considering when I finished the build the curcuit board in the E60 MAF was loose and knocking around but didn't pose any immediate issues, I found a spa...
Same as this guy! But shipped to Australia or wherever Doug Fab lives :)