unijabnx2000's Mentions Received

oooo welcome to the forum. Nice to have another person on board. Sorry to hear about your problems. Our [url= URL=http://www.sr20-forum.com/driveline/]driveline[/url] section would be the best to r...

Well the problems still persist.. so I had my boy rae rae SR20NYC send me an oem b15 clutch master in hopes this Napa unit is just a pos..

First thing I noticed is the clevis was shorter on the ...

unijabnx2000 Unsure at the moment. When I get a chance to measure the b13 distributor and cap, I can adjust the design accordingly. Currently this cap is for the b14+ distributor. Chances are it wo...

Well here's a lil video for you guys.. Sorry these pretty shakey.. the country roads are a bit bumpy an it's hard to keep the phone steady lol

http://youtu.be/gSY4rK04V0o

You might notice a lil...

Never in my wildest dreams did I dream to hope a server transfer would fix this problem too!



2_Liter_Turbo (Hotmail)
Andreas Miko (Hotmail)
hurddawg (Hotmail)
icz...

IT SHIFTS!! WHOOHOO!!

I removed the shift check bolt, stopper bolt and the shifter check ball bolts springs an balls and it freed up then I reinstalled everything and it goes into all gears...

I...

Finally got the trans on, I ended up unbolting the cross member and let the engine droop all the way down from the passenger mount and it went on pretty smooth..

http://i1317.photobucket.com/album...

unijabnx2000, I'll give you a quick synopsis.

- I saw one, then three, then dozens of Classified Ads in the regional sections.
- I deleted/locked those threads according to a rule against this tha...

Thanks unijabnx2000 that's all I needed to see :D My room is reserved, it will be my first time out, and if all goes according to plan I'll be able to trailer my P10 out there as well.

Select forum members aren't getting forum e-mails.

I believe I have proof. There's metallic sort of yellowish paint of some sort all over the scrapes on the cross member, oil pan, sway bar on passenger side, header etc. Cross member is also cracke...

it was 108.4 mph

Got it on my cell phone camera. 13.15 seconds but I did not get your speed. Can you provide that to me? My camera died again on me but I took one video at the strip when I was at the viewing area. ...

blckse-r
https://dl.dropboxusercontent.com/u/34879635/SR2014/jason%20turbo%20b14%20a.png

https://dl.dropboxusercontent.com/u/34879635/SR2014/jason%20turbo%20b14%20b.png

https://dl.dropboxusercont...

The only thing I see with your accounts is you have automatic subscription to threads you post in on. Try disabling that, unsubscribing, and manually subscribing...

lynchfourtwenty unijabnx2000

I know Joe plans to leave that early.
That meeting spot for me is about a 3hr40min drive, so id have to leave early too
but it shouldnt take as long as google says to get there.
I wouldnt mind g...

That's a great meeting spot. However, see my comments below.

It takes me about 3 hours to get to the meeting spot. Maybe we could push things back 1.5 hours? I'd rather not have to leave as early ...

Thanks!
Shoot me your email.
I havent taken any more logs since I re-uploaded the firmware and cal, b/c ive only driven it once since.
But I'll def send you what I have.

unijabnx2000 - You are welcome to shoot me over your calibration and logs and I can see if I can lend a hand.

Thanks for the support unijabnx2000 and everyone else who donated funds. Gonna order the awards this week.

My v8 comment was meant about the acoustics.... since we are talking drone....

I do like the idea of the vortex muffler.

Flow is flow and I really enjoyed that video and that show! Time to put it to some good use, now!

Thanks, unijabnx2000

Strongly considering making this trip. I am just north of Charlotte BenFenner unijabnx2000. I have added myself to the shared map.

The VE has made it back and fourth to Maine many times, but sti...

unijabnx2000 - It is a legit BB Garret Turbo, and you're right, I could go that route, except that I would like to have at least a GT2871R on there and they will only approve the reduction in price...

Niceee. Then you will hit the tunnels. I would like to do a "Top Gear" run in the tunnels. I still might make it to this years convention. I am finally ready to get back to work after my foot surgery.