All posts where Dave_SR20 has mentioned other members
Very descriptive. Good work man. Vadim i know we have some but can we add this to the sticky?
MFactory. Hey Stephen do you have an update for us?
Kyle i'm not using this trans until next year if you want to work something out. The diff is yet to be installed.
MFactory hey Stephen. Any update on the gears?
TheSam or UNISA JECS Do you guys know of any video or picture references on how to shim it?
TheSam or UNISA JECS Do you guys know of any video or picture references on how to shim it?
MFactory Stephen can you confirm you received the sample gears?
Its a bit more clean now. Thanks Charlie.
MFactory do I exclude the shim that goes between the 2 halves of the diff?
MFactory does these require shimming? Per the FMS you can shim the original ones but these are built differently.
kevwal SE-Rican dorsey61 Forced Compression Victorious SR20GTi-R cortrim1 jagy (with a higher FD?)
kevwal SE-Rican dorsey61 Forced Compression Victorious SR20GTi-R cortrim1 jagy (with a higher FD?)
kevwal SE-Rican dorsey61 Forced Compression Victorious SR20GTi-R cortrim1 jagy (with a higher FD?)
kevwal SE-Rican dorsey61 Forced Compression Victorious SR20GTi-R cortrim1 jagy (with a higher FD?)
kevwal SE-Rican dorsey61 Forced Compression Victorious SR20GTi-R cortrim1 jagy (with a higher FD?)
kevwal SE-Rican dorsey61 Forced Compression Victorious SR20GTi-R cortrim1 jagy (with a higher FD?)
kevwal SE-Rican dorsey61 Forced Compression Victorious SR20GTi-R cortrim1 jagy (with a higher FD?)
kevwal SE-Rican dorsey61 Forced Compression Victorious SR20GTi-R cortrim1 jagy (with a higher FD?)
Here is a side by side on a 32V vs a 70V. I would love to see 150mph trap speed. MFactory maybe you can answer this question. Why with the stock circulations we don't see close to those numbers on ...
Neither am I. MFactory can you recommend ratio for a drag application? See below for our factory ratio. Base it on a 24.5" Tire
RS5F70V (2.0L) FD 4.176
3.333 1st
1.955 2nd
1.286 3rd
0.92...
Good stuff man. MFactory let us know when the reported problems are corrected and take my money already lol.
MFactory you should see this by 7th via UPS 1ZE729770397428111
MFactory Stephen I sent you a PM requesting shipping instructions. Also let me carrier preference
MFactory when you receive and evaluate these let us know the price on angle and straight cuts for 650hp + capabilities