All posts where Vadim has mentioned other members
Correct on just bolt ons getting that much power, but incorrect on your exhaust suggestion. NA is sensitive to exhaust flow, thus going too big will cost you power. Also cheap SSAC knock off is a...
Big difference, TunerPro RT is technically free (with nag screen). TunerPro is just a tuning software. TunerCode is firmware for the actual ECU. TunerCode is no longer sold as a standalone produ...
If you want to tune it yourself, or if you want a tune specific to your car (would make the most power and gas mileage if tuned right), then NEMU.
If you just want something that runs and would ...
I should mention also, doing a virtual dyno run on a real dyno would show more consistent data. Discrepancies in the road affect the torque output, while TP would technically stay the same (same a...
SE-Rawkus how far off is it? When I was testing out the GTiR PP on a S13/S14 flywheel it wouldn't align either, until I rotated it a few times and made sure to go through the 3 pegs at the same ti...
Loek actually my main problem is finding space for a PS cooler, adding a bigger one wont help :). P11's just have it routed where the intercooler sits, so the lines get in the way of the piping.
Removed those steps they don't apply. Keep the white wires connected the way they are.
He don't sell me cars, he just buys them!
I'll see if that works, that would be nice (yet still big but oh wells!)
Doh sorry man was under the P11 & Fozzy all day.
Thanks b13luvr!
Cliff! Where is the dislike button!
I think we might be in the clear with GL-4 Rating :)
Amazon.com: Valvoline vv824 SAE 85W140 High Performance Gear Oil, 1 Gallon: [email]Automotive@@AMEPARAM@@http://ecx.images-amazon.com[/email]/i...
blackngreenb14 don't take it offensively. We have people asking these rather simple questions all of the time. After you answer them for the 100th time, you get tired of doing all of the work for...
Haulin200sx thanks for the heads up, I'll just a few more tunes and update it. Calum might have had it wrong or had a custom tuned one.
Keep in mind you can tune the VQ table too, it doesn't ha...
That's some awesome numbers coach, did you tune it yourself or have someone tune it for you?
That's basically what I made just with a spring so it's not required for it to be vertically mounted. :)
unijabnx2000 hit up Lowes or Home Depot, I found male and female barb there, though they ...
If pop charger made no noise difference then you either haven't redlined it or your car is too loud to begin with :).
It's 9 seconds you newb :-P
Seat of the pants bumping up timing d...
Getting tired of my cheap sears jacks, think it's time to upgrade to the Costco jack, thanks for the tip Isfahan
Also no local HF FTL :(
lynchfourtwenty Check [url= URL=http://www.sr20-forum.com/844553-post9.html]this post[/url] out, Boostlee found and awesome VD how to article!
Soooo pick it up and bring it here :D. I will ...
Stuck, but HTML magic would be from Cliff. Though I think it might be too time consuming.
One thing I personally run is [url= URL=http://www.sr20-forum.com/415849-post18.html]Enthalpy timing[/url] on my DET, it's pretty good and gained me around 15whp over stock Avenir timing map.
I ...
Maybe dfddfd2 can chime in. I would try on a non Tunercode firmware, but car is running a NEMU so can't upload regular bins.
Cliff broke it again! :rofl:
Can you guys see it at http://www.sr20-forum.com/members/vadim-albums-tuning-picture221-det-coldsputter-ect-tps-enrich-factor.html ?
I kept the TB heater in place, ...
That would be a question dfddfd2, since he knows our ECU's in and out.
From what I remember it was 30-40 at max. I'll try it next time I drive wife's car, I don't drive it much. Turbo P11 ...