All posts where Vadim has mentioned other members
He didn't recommend any specific spring rates, but he did mention using 800lbs in rear and 600lbs in front. I'm going little softer to make the car be a bit more drivable on the street. If all el...
BC coilovers with 400lbs spring front and back, rear on full stiffest, front on 10 less clicks. Eibach 25mm Front swaybar on the softest setting. In the rear I have a ES Bushings, Nismo 25mm sway...
Best of SR2013 Trophy Winners
I don't see it in his albums yet... The B14 is the red with black lip and hood bra right?
Added pictures that I could find easily. Still need two from:
B14
Tristan (@triniboy07's Cousin)
B15
mirrortints
Jeff P
Best of SR2013 Trophy Winners
Best of SR2013 Trophy Winners
Best of SR2013 Trophy Winners
Best of SR2013 Trophy Winners
Best of SR2013 Trophy Winners
Best of SR2013 Trophy Winners
Kyle 's bone stock was pretty impressive indeed!
Loosened up the front swaybar, Kyle will be happy
http://images.rvsmods.com/var/albums/Cars/B15/Suspension/Anti-Sway-Bars/Front/CIMG9978.JPG?m=1370406983
Oil change - Done
Brake Fluid Change -...
Wheel spin = instant increase in RPM, to virtual dyno it's seen as a magical increase in power. I've made 500whp before on my T25 B15, with wheelspin of course ;).
I don't know about you bu...
Ah yeah I moved them and forgot to fix the links. [url= URL=http://www.sr20-forum.com/ve/59056-how-wire-use-ve-distributor-usdm-rotorhead-cap.html]Fixed[/url].
You have external coil, definitel...
IAT Sensors are direct replacement for GM cars, as in they are not "universal", they they don't ship with mounting hardware for universal applications. I was able to just get a 3/8" threaded bung ...
Cliff what do you think about using something similar for actual How To's? Having an easily searchable location where you upload pictures directly to the site through that how to, etc. would be ki...
It makes sense to allow it, that way John can upload base tunes there too. Though it would be nice keeping all tunes in one section, that's not reasonable, especially if people are just seeking he...
I really don't care what it is anymore, it's nice not being on the ditch with the nose when I boost in a turn. ;)
As for jacking points, interesting, I've always used two spots by where the the ...
After swapping all of the gears in, getting all of the check balls and plugs in the bell housing, how easily should I be able to to move the shift forks? It was fairly easy to switch gears before ...
After swapping all of the gears in, getting all of the check balls and plugs in the bell housing, how easily should I be able to to move the shift forks? It was fairly easy to switch gears before ...
What part are you really confused about? Maybe a chat on the phone can help :)
tswii Question is #3 x90mm or x80mm?
EDIT: Just check on my bell housing it's definitely a x90mm.
Here is the list of bolts to make your shopping trip easier (has quantities).
1 x M12 - 1.75 x 5...
$350 is a little too much for me just for beam bending esp since I have two beamed cars. I might just continue with building my own kit.
Actually DET's run about the same if not more timing then NA DE's. Thus when you are running an NA DE ECU with 8.5 compression without turbo, you pretty much need to increase your timing by 5* or ...