the headgasket wont be the weak point, that will depend on the head stud setup and machining of the head and block and so on. People using VET gaskets to 700+ with no issues, I used a bored out to...
Ive seen spec, CM, Competition disks all do that. I used to have an ACT 4 puck unsprung with Extreme PP in my SE-R when I first turbod it and that disk never failed. It got old and worn from many...
Just been doing a little cleaning up to prepare the car to go to Washington. Getting rid of the harness adapter as the person who made it didnt do a very good job and pins are falling off. Also ran...
Just been doing a little cleaning up to prepare the car to go to Washington. Getting rid of the harness adapter as the person who made it didnt do a very good job and pins are falling off. Also ran...
Just been doing a little cleaning up to prepare the car to go to Washington. Getting rid of the harness adapter as the person who made it didnt do a very good job and pins are falling off. Also ran...
Thanks guys, should be picking up the car this week sometime. Gotta finish up some small things on it like loctite all the bolts for the alternator bracket as they seem to want to rattle loose with...
Thanks guys, should be picking up the car this week sometime. Gotta finish up some small things on it like loctite all the bolts for the alternator bracket as they seem to want to rattle loose with...
Turbo size mainly and at that boost level we were pretty much maxing it out. Also t3 turbine housing instead of t4. But its still holding pretty good power out to 8500. Intercooler flow limit and t...
Very cool story. Definitely keep it. Back in 04 I sold my very first se-r that had 296k miles on it. Didnt get to see it hit 300k and neither did the new owner as the car got totaled a couple mont...
Contains unread posts
Contains no unread posts
Thread is closed
You have posted in this thread
Back to top